Black Halogen Headlights Pair with LED DRL for Nissan Rogue (2014-2016)
$149.95
Ir directamente a la información del producto
Black Halogen Headlights Pair with LED DRL for Nissan Rogue (2014-2016)
$149.95
DS-260604BA0A
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2014-2016 Nissan Rogue (T32) with factory halogen lamps and an LED daytime running light (26060-4BA0A / 26010-4BA0A). They will not fit Rogue Select — that is a different lamp (2008-2013 Rogue and 2014-2015 Rogue Select halogen pair). They will not fit Rogue Sport, factory HID or factory LED lamps, or the 2021-2023 Rogue (2021-2023 Rogue S LED pair).
Replace faded or cracked factory halogen lamps on your 2014-2016 Rogue with this OE-style black-housing pair with an LED daytime running light. Each lamp has the halogen low and high beam, the LED DRL light pipe and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H11 low-beam and H9 high-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2014-2016 | Nissan Rogue | T32 factory halogen with LED DRL. Not Rogue Select, Rogue Sport, HID or factory LED. Not 2021+. |
Specs
- Sold as: driver and passenger pair
- Housing: black, clear lens, amber side marker, LED daytime running light
- Low beam: H11; high beam: H9
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen headlight with LED DRL
- Passenger-side halogen headlight with LED DRL
Interchange References
Replaces the original assemblies commonly crossed with 26060-4BA0A, 26010-4BA0A, 26060-4BA2A, 26010-4BA2A, NI2502226.
Installation: Nissan Rogue (2014-2016)
On the 2014-2016 T32 Rogue the front bumper cover has to come off to reach the headlight bolts. Plan on a helper, trim tools and spare bumper clips. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the fasteners across the top of the bumper and grille, the screws in each wheel well and the bolts underneath, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog light or similar connectors and set the cover on a soft surface.
- Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
- Transfer your H11 and H9 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper, reconnect the battery, and test low beam, high beam, the LED daytime running light and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Which vehicles do these headlights fit?
2014-2016 Nissan Rogue (T32) with factory halogen headlights and an LED daytime running light. They do not fit Rogue Select, Rogue Sport, factory HID or factory LED lamps, or the 2021-2023 Rogue.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Will these fit a Rogue Select?
No. Rogue Select uses a different lamp. Use the 2008-2013 Rogue and 2014-2015 Rogue Select halogen pair for that vehicle.
Are bulbs included?
No. Reuse your H11 low-beam and H9 high-beam bulbs, or add new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.
How are they installed on a 2014-2016 Nissan Rogue?
The front bumper cover has to come off. Then unplug the headlight, remove its bolts, transfer your bulbs if you are reusing them, install the new lamp and aim the beams.