Black Halogen Projector Headlights Pair for Cadillac SRX (2010-2016)

Replace hazy or cracked headlights on your 2010-2016 Cadillac SRX with factory halogen headlights with this new black projector pair. Bulbs are not included; reuse your factory H11 and 9005 bulbs.

Fitment

Will NOT fit: SRX with factory HID/AFS (see our HID version); 2004-2009 SRX.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: H11 (not included)
• High beam: 9005 / HB3 (not included)
• Housing: Black
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 22853872, 22853873_2011, 22853873, 15890957, 20825613, 20871473, 20912785, 20916371, 15890956, 20825614, 20871472, 20912786, 20916372. Partslink: GM2503345, GM2502432, GM2503432.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• Bulbs not included (reuse your factory bulbs, per listing)

Installation

1. Open the hood and release the upper fascia clips, weatherstrip and bumper retainers.
2. Remove the six 7 mm bolts under each side, the three Phillips screws in each wheel well and the rear 7 mm bumper bolts.
3. Unplug the bumper connectors and washer hoses and pull the bumper off.
4. Remove the three 10 mm headlight bolts, release the retaining tab, pull the lamp forward and unplug it.
5. Move your factory H11 and 9005 bulbs into the new lamps (not included per the listing), install in reverse and aim the lamps.

Steps compiled from 1A Auto "How to Replace Headlights 2010-2016 Cadillac SRX" video; Go-Parts 2010-2016 SRX headlight guide. Professional installation and headlight aiming are recommended.

FAQs

Are bulbs included?
No. Per the listing, reuse your stock H11 low and 9005 high beam bulbs.

Will these fit a car with factory HID?
No. These are for factory halogen cars only.

Do I need to remove the front bumper to replace these headlights?
Yes. The SRX front bumper comes off to reach the three headlamp bolts.

What bulbs do these use?
H11 low beam and 9005 high beam, per the listing.

Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.