Black Halogen Projector Headlights Pair w/ LED DRL & Bulbs for Chevy Tahoe / Suburban (2015-2020)

Replace yellowed or cracked headlights on your 2015-2020 Chevrolet Tahoe or Suburban with factory halogen headlights with this brand-new pair of black halogen projector headlights with LED DRL, bulbs included.

Fitment

Will NOT fit: HID/LED-equipped Tahoe or Suburban (Premier/High Country); GMC Yukon.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Black
• Low beam: halogen projector
• DRL: LED
• Bulbs: included (sizes not stated in listing)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 23490005, 22783093, 23355852, 23387143, 22783094, 23355853, 23387144, 84178176. Partslink: GM2502405, GM2503405.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Bulbs included

Installation

1. Disconnect the battery. Remove the plastic clips holding the radiator shroud and lift it off.
2. Remove the 10 mm grille bolts and the upper bumper bolts, then pull the grille/bumper forward enough to reach the headlamp (unplug the fogs if the bumper comes off).
3. Remove the two upper and two lower headlamp bolts and pull the lamp straight forward. Unplug it.
4. Plug in and bolt in the new lamp, refit the grille, shroud and clips, and aim the headlights.

Steps compiled from Tahoe Yukon Forum and GM-Trucks.com headlight-removal threads, T-Rex K2 grille instructions. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
The listing images do not state the bulb sizes. Bulbs are included; match your factory bulb sizes if you ever replace them.

Will these fit a Tahoe Premier with factory HID or LED?
No. These are for halogen trucks; HID/LED trucks use a different lamp and plug.

Do I need to remove the front bumper to replace these headlights?
Usually the grille and upper bumper fasteners have to come off (radiator shroud clips, 10 mm grille bolts and upper bumper bolts), then four headlamp bolts: two on top and two behind the grille.

Can I install HID or LED kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.