Black Halogen Projector Headlights Pair w/ LED Light Tube & Bulbs for GMC Acadia (2013-2016) & Acadia Limited (2017)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace yellowed or cracked headlights on your 2013-2016 GMC Acadia (or 2017 Acadia Limited) with factory halogen headlights with this new black projector pair with LED light tube. Bulbs are included.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2013-2016 | GMC Acadia with factory halogen headlights (black halogen plug) | Factory halogen headlights |
| 2017 | GMC Acadia Limited (halogen) | Factory halogen headlights |
Will NOT fit: Acadia with factory HID (white plug; see our HID version); 2007-2012 Acadia; 2017+ second-generation Acadia.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: 9012 / HIR2 (included)
- Turn signal: 3157 (included)
- Parking light: LED
- Side marker: LED
- Housing: Black
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 23358995, 19433929, 22939422, 23137298, 23172862, 23181976, 23423712, 19433928, 22939423, 23137299, 23172864, 23181975, 23423713. Partslink: GM2502376.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- HIR2 and 3157 bulbs (included, per listing)
Installation
- Disconnect the negative battery cable. Open the hood and remove the push clips holding the upper radiator/bumper cover, plus the clip next to each headlight and the Phillips screws along the top of the bumper.
- Turn the wheel (or remove it), remove the screws along the front of the wheel-well liner and pull it back; remove the 7 mm bolt that joins the bumper cover to the fender.
- Unplug the fog lights, remove the fasteners underneath and slide the bumper cover off.
- Remove the 10 mm headlight bolts: two on top (one at the fender, one between the radiator support and coolant reservoir), one through the lower plastic adjuster and one at the fender side.
- Pull the lamp forward, unplug it and install the new halogen lamp (bulbs are pre-installed per the listing), starting all bolts before tightening. Refit the bumper and aim the headlights.
Steps compiled from 1A Auto 2007-2016 GMC Acadia headlight video, GM Parts Giant service notes and AcadiaForum. Professional installation and headlight aiming are recommended.
FAQs
How do I know if my Acadia has halogen headlights?
Check the plug behind the headlight. Per the listing, the black plug is the halogen version and fits; the white plug is HID and does not.
Will these fit a 2017 Acadia?
Only the 2017 Acadia Limited (old body). The new 2017+ Acadia uses a different lamp.
Do I need to remove the front bumper to replace these headlights?
Yes. On the 2013-2016 Acadia the bumper cover comes off to reach the four 10 mm headlamp bolts.
What bulbs do these use?
HIR2 (9012) low/high beam and 3157 turn signal, included per the listing diagram. Parking light and side marker are LED.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.