Black HID Headlights Pair for Jeep Grand Cherokee WK (2019-2022)
$405.95
Ir directamente a la información del producto
Black HID Headlights Pair for Jeep Grand Cherokee WK (2019-2022)
$405.95
DS-68426873AD
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit 2019-2022 Jeep Grand Cherokee WK (WK2) models with factory HID/xenon lamps and no headlamp washer. This is a driver and passenger pair — two lamps. The D3S bulbs, ballasts and igniters are not included; reuse yours from the original lamps. They do not fit halogen headlights (we carry that pair here). They do not fit SRT or Trackhawk, lamps with a headlamp washer, the 2021-up Grand Cherokee WL, or Grand Cherokee L. 2022 fitment is the WK body only, not the new WL.
Replace faded or cracked factory HID lamps on your 2019-2022 Grand Cherokee WK with this black-housing pair. Each lamp uses your original D3S bi-xenon bulb for low and high beam, bolts to the factory points, and plugs into the factory connectors, with no splicing.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2019-2022 | Jeep Grand Cherokee WK | WK2 body only, factory HID/xenon, without headlamp washer. Not SRT or Trackhawk. Not the 2021-up WL or Grand Cherokee L. |
Specs
- Sold as: driver and passenger pair (two lamps)
- Housing: black, dark bezel
- Low and high beam: D3S bi-xenon (reuse your original bulbs)
- Bulbs, ballasts and igniters not included
- 7-pin connector, without auto-leveling motor
- DOT compliant
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side HID headlight (68426873AD style)
- Passenger-side HID headlight (68426872AD style)
Interchange References
Replaces the original assemblies commonly crossed with 68426873AD, 68426872AD, 68426873AA, 68426873AB, 68426873AC, 68426872AA, 68426872AB, 68426872AC, CH2502340, CH2503340.
Installation: Jeep Grand Cherokee WK (2019-2022)
On the 2019-2022 Grand Cherokee WK the headlights typically come out from the engine bay after the upper cover is removed. The bumper cover usually stays on, though you may need to loosen the corner fasteners for clearance. Turn the lights and ignition off before you start. Handle the D3S bulbs by the base only.
- Open the hood and remove the upper radiator cover so you can reach the three bolts along the top of each headlight.
- Remove those bolts. Loosen the bumper-cover corner fasteners if the lamp will not slide forward cleanly.
- Pull the lamp forward and unplug the factory connectors. Remove the D3S bulb and the ballast from the original housing and install them on the new lamp.
- Plug the new lamp in, seat the locating points, and start all bolts by hand before tightening them evenly.
- Repeat on the other side. Test low beam, high beam and the parking lamp, then aim the beams.
Frequently Asked Questions
Which vehicles do these headlights fit?
2019-2022 Jeep Grand Cherokee WK (WK2) with factory HID/xenon headlights and no headlamp washer. They do not fit SRT or Trackhawk, washer-equipped lamps, the 2021-up Grand Cherokee WL, or Grand Cherokee L. 2022 fitment is the WK body only. Compare your current lamps with our photos before ordering.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, two lamps.
Are the HID bulbs and ballasts included?
No. The D3S bulbs, ballasts and igniters are not included. Reuse yours from the original lamps.
Will these fit a halogen Grand Cherokee?
No. These are HID/xenon housings only. We carry the halogen pair for 2017-2022 Grand Cherokee separately.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors once you transfer your D3S bulbs and ballasts.
How are they installed on a 2019-2022 Grand Cherokee WK?
The headlights typically come out from the engine bay after the upper cover is removed. The bumper cover usually stays on, though you may need to loosen the corner fasteners. Transfer your D3S bulbs and ballasts, bolt the new lamps in, and aim the beams afterward.