Black HID Projector Headlights Pair for Acura TSX (2009-2014)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
New black-housing HID (xenon) projector headlight pair for the 2009-2014 Acura TSX, built for cars with factory HID. D2S low beam, HB3 high beam. Bulbs and ballasts are not included, so reuse your factory parts.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2009-2014 | Acura / TSX | Sedan and Sport Wagon with factory HID headlights |
Will NOT fit: 2004-2008 TSX or the 2015+ TLX.
Common Reasons to Replace
- Yellowed, hazy, or cracked factory lenses cutting light output
- Moisture or condensation inside the housing
- Broken mounting tabs or collision damage
- Refreshing the front end with a new black look
Specs
- Light type: HID projector (D2S low) + halogen HB3 high
- Housing: Black, clear lens
- Bulbs: Low beam D2S, high beam HB3, turn signal 7528 (bulbs NOT included)
- Lens: Polycarbonate; housing: polypropylene
- DOT & SAE compliant
- Fitment type: Direct replacement, plug-and-play connectors
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 33151-TL0-A02, 33101-TL0-A02 · Partslink: AC2502118, AC2503118
What's Included
- 1 x Driver-side headlight assembly
- 1 x Passenger-side headlight assembly
- Ballasts and igniters are not included. Transfer them from your factory lamps.
- Bulbs not included — fits Low beam D2S, high beam HB3, turn signal 7528
Installation (2009-2014 Acura TSX)
Tools: 10 mm socket and ratchet, Phillips screwdriver, clip tool, T20/T25 Torx (ballast).
- Disconnect the negative battery cable and let the HID system sit a few minutes.
- Remove the front bumper cover (upper clips/bolts, wheel-well screws, lower screws).
- Remove the headlight bolts and pull the lamp forward, then unplug it.
- Move the D2S bulbs, igniters and ballasts to the new lamps.
- Install, reconnect, test, refit the bumper and aim.
Steps based on the Acura TSX 2009-2014 service manual headlight procedure.
FAQ
Do these come with HID bulbs and ballasts?
No. Move your factory D2S bulbs, igniters and ballasts to the new housings.
Will these fit a 2008 TSX?
No. The 2009 TSX is a new generation with a different headlight.
What bulb sizes do these use?
Low beam D2S, high beam HB3, turn signal 7528 (bulbs NOT included).
Can I put LED bulbs in these?
The low beam is factory HID (D2S), so keep the xenon bulbs. The HB3 high beam accepts a 9005/HB3 LED kit.