Black HID Projector Headlights Pair for Ford Taurus (2013-2019)

Replace hazy headlights on your 2013-2019 Ford Taurus with this new black HID projector pair. Reuse your factory bulbs and ballasts.

Fitment

Will NOT fit: Halogen-headlight cars.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: HID, match your factory bulbs (reuse them)
• Housing: Black
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: DG1Z13008P. Partslink: FO2502306, FO2503306.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• HID bulbs and ballasts are NOT included; reuse your factory ones

Installation

1. Turn off the ignition and lamps, open the hood and remove the front bumper cover.
2. Remove the headlamp upper and front bolts and the side bolt, then the push-pin rivet.
3. Disconnect the electrical connector and lift the lamp out.
4. Install in reverse: upper/front bolts 3.2 Nm (28 lb-in), side bolt 7 Nm (62 lb-in); reuse your factory HID bulbs and ballasts and aim the lamps.

Steps compiled from Ford Taurus service manual "Headlamp Assembly Removal and Installation" (fortau.com); Ford owner manual "Removing a Headlamp Assembly". Professional installation and headlight aiming are recommended.

FAQs

Will these fit a halogen Taurus?
No. Factory HID cars only, per the listing.

Are ballasts included?
No. Reuse your factory ones.

Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper cover comes off to reach the headlamp bolts.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.