Black HID Projector Headlights Pair w/ LED DRL for Chevy Silverado 1500 (2016-2018)

Replace yellowed or cracked HID headlights on your 2016-2018 Chevrolet Silverado 1500 with this brand-new pair of black HID projector headlights with LED DRL. Half assembly: reuse your factory HID bulbs and ballasts.

Fitment

Will NOT fit: Halogen Silverado; 2500HD/3500HD; 2019 Silverado; GMC Sierra.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Black
• Low beam: factory HID (not included)
• DRL: LED
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 84388631, 84017968, 84064061, 84181564, 84356948, 19353412, 84017969, 84064062, 84181565, 84356949. Partslink: GM2502451, GM2503451.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Headlight housings only
• Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

1. Disconnect the battery. Remove the plastic clips holding the radiator shroud and lift it off.
2. Remove the 10 mm grille bolts and the upper bumper bolts, then pull the grille/bumper forward enough to reach the headlamp (unplug the fogs if the bumper comes off).
3. Remove the two upper and two lower headlamp bolts and pull the lamp straight forward. Unplug it.
4. Plug in and bolt in the new lamp, refit the grille, shroud and clips, and aim the headlights.

Steps compiled from Tahoe Yukon Forum and GM-Trucks.com headlight-removal threads, T-Rex K2 grille instructions. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
The listing does not state bulb sizes. Bulbs and ballasts are not included; reuse your factory HID parts.

Will these fit a halogen Silverado?
No. These are for trucks that came with factory HID headlights.

Do I need to remove the front bumper to replace these headlights?
Usually the grille and upper bumper fasteners have to come off (radiator shroud clips, 10 mm grille bolts and upper bumper bolts), then four headlamp bolts: two on top and two behind the grille.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.