Black HID Projector LED DRL Headlights Pair for BMW F10 528i 535i 550i xDrive (2011-2013)

Black HID Projector LED DRL Headlights Pair for BMW F10 528i 535i 550i xDrive (2011-2013). New driver and passenger replacement assemblies. Match the original housing and factory lighting equipment before ordering.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing/style: Black
• Lighting: HID Projector / LED DRL
• Xenon high/low beam D1S; signal PY21W. Xenon and signal bulbs not included. LED daytime running lights and LED side markers built in.

Bulb sizes: D1S | PY21W

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly
• Built-in LED daytime running lights and LED side markers

Interchange References

63117203243, 63117203244

Installation: BMW F10 528i 535i 550i xDrive (2011-2013)

Professional installation and beam aiming are recommended. Switch off the lights and ignition before servicing.

1. On the 2011-2013 F10, switch off and de-energize the HID system using the vehicle service procedure. Release the hood seals and upper fascia retainers, lower bumper screws and wheel-arch fasteners to reach the bumper-to-fender hardware.
2. Support the front bumper cover and release the corner as required to expose the headlight mounts; disconnect fog/parking-sensor wiring if the cover comes off. Remove the lamp mounting fasteners and release the rear electrical connector.
3. Have a qualified installer check and transfer compatible xenon bulbs and required original electronics, then seat the lamp guides and refit the fascia. Check the non-adaptive lighting functions, any diagnostic/programming requirements and beam aim before driving.

Frequently Asked Questions

Which vehicles and factory lighting equipment are compatible?
2011-2013 BMW 528i (F10 pre-LCI; factory xenon/HID without Adaptive/AFS only); 2012-2013 BMW 528i xDrive (F10 pre-LCI; factory xenon/HID without Adaptive/AFS only); 2011-2013 BMW 535i (F10 pre-LCI; factory xenon/HID without Adaptive/AFS only); 2011-2013 BMW 535i xDrive (F10 pre-LCI; factory xenon/HID without Adaptive/AFS only); 2011-2013 BMW 550i (F10 pre-LCI; factory xenon/HID without Adaptive/AFS only); 2011-2013 BMW 550i xDrive (F10 pre-LCI; factory xenon/HID without Adaptive/AFS only). Factory xenon/HID F10 without AFS only. Not compatible with Adaptive / adaptive headlight / AFS models, halogen models, or 2014+ LCI vehicles. Xenon and signal bulbs are not included; confirm matching original electronics and connectors before ordering.

Which bulbs are used and included?
Xenon high/low beam D1S; signal PY21W. Xenon and signal bulbs not included. LED daytime running lights and LED side markers built in.

What access is needed for installation?
The F10 bumper corner must be released for headlight access; HID electronics require professional service. Professional installation and beam aiming are recommended.