Black LED Bar Projector Headlights Pair for GMC Sierra 1500 (2014-2018) / 2500 HD 3500 HD (2015-2019)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Update a 2014-2018 Sierra 1500, or a 2015-2019 HD, with a black projector pair and a built-in LED bar daytime running light. You get driver and passenger assemblies with a clear lens, black housing, and an amber corner lamp. Bulbs are not included — reuse your factory HB4 (9006) headlight bulbs and T20 turn-signal bulbs, or install new ones when you swap the lamps.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2014-2018 | GMC Sierra 1500 | Factory halogen only; not factory HID or LED DRL; not 2019-up |
| 2015-2019 | GMC Sierra 2500 HD | Factory halogen only; not factory HID or LED DRL; not 2014 HD |
| 2015-2019 | GMC Sierra 3500 HD | Factory halogen only; not factory HID or LED DRL; not 2014 HD |
Specs
- Sold as: a driver and passenger pair
- Style: black housing, clear lens, amber corner lamp, projector, LED bar daytime running light
- Lighting: reuse factory HB4 (9006) and T20 bulbs; LED bar DRL
- DOT certified
- 12 V
- New aftermarket assemblies
In the Box
- Driver and passenger black LED bar projector headlights
Interchange References
Replaces original-style 2014-2018 Sierra 1500 and 2015-2019 HD halogen headlights commonly crossed with GM2502390, GM2503390, GM2502394, GM2503394, 23130715, 23130716, 23130717, and 23130718.
Installation: GMC Sierra 1500 (2014-2018) and 2500 HD 3500 HD (2015-2019)
On these trucks the headlight is typically easier to remove after the grille or the bumper cover is loosened, because some of the mounting bolts sit behind the fascia. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Open the hood. Remove the upper grille or radiator-cover fasteners that block the headlight bolts, and loosen the bumper cover at the corner if needed to reach the lower fasteners.
- Unplug the headlight connectors, including the LED bar connector if it is separate.
- Remove the headlight mounting bolts and lift the old assembly out of the fender opening.
- Transfer your HB4 (9006) and T20 bulbs to the new headlight and lock them in place.
- Set the new headlight in the opening, start all bolts by hand, then tighten them evenly so the housing sits flush to the fender, grille, and bumper. Reinstall the grille or bumper cover, reconnect the battery, and test low beam, high beam, the LED bar, and the turn signal. Aim the headlights on a level surface before driving at night.
Frequently Asked Questions
Which trucks does this pair fit?
GMC Sierra 1500 (2014-2018) and Sierra 2500 HD and 3500 HD (2015-2019) with factory halogen headlights. Compare your current housings with our photos before ordering.
Will it fit factory HID or factory LED DRL headlights?
No. These assemblies replace factory halogen headlights. They will not fit factory HID or xenon lamps, or trucks that already have factory LED daytime running lights.
Will it fit a 2014 Sierra HD or a 2019-up 1500?
No. 2014 Sierra HD uses the previous-generation headlight, and 2019-up Sierra 1500 uses a different body. Do not order this pair for those trucks.
Are bulbs included?
No. Reuse your factory HB4 (9006) and T20 bulbs, or install new bulbs when you swap the lamps. On factory halogen trucks the LED bar lights with the parking lights.