Black LED Fog Lights Pair for Mack CXU (2008-2018)

Replace the factory bumper fog lamps on your 2008-2018 Mack CXU with this LED pair. Each assembly is a round LED driving lamp with a pigtail connector. Sold as a driver and passenger pair. Both sides use the same non-handed housing.

Fitment

Specs

• Condition: New
• Sold as: Driver and passenger pair
• Lighting: LED
• Housing: Black, clear lens
• Operating voltage: 12V
• Warranty: 1 year

In the Box

• Driver-side fog light assembly
• Passenger-side fog light assembly

Interchange References

84722510, 888-5400

Installation: Mack CXU (2008-2018)

These fog lamps mount in the front bumper opening that matches this housing. You usually reach the fasteners from the front or the underside of the bumper. Professional installation and aiming are recommended.

1. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
2. Unplug the harness at the back of the old fog lamp. Remove the mounting screws or clips that hold the lamp in the bumper.
3. Set the new lamp in the same opening, start the fasteners by hand, and snug them evenly. Do not overtighten the housing.
4. Reconnect the factory harness until it clicks. Repeat on the other side if you are installing a pair.
5. Reconnect the battery and test every lighting function. Aim the lamps on level ground before driving at night.

Frequently Asked Questions

Which trucks do these fog lights fit?
Mack CXU trucks from 2008 through 2018 with this round LED bumper housing. Compare your current lamps with our photos before ordering.

Are these a complete pair?
Yes. You get two fog light assemblies. Both sides use the same non-handed lamp.