Black LED Headlights Pair for Acura MDX A-Spec (2017-2020)

Replace hazy or damaged factory Jewel Eye LED headlights on your 2017-2020 Acura MDX with this new black A-Spec-style pair. LED module not included per the listing.

Fitment

Will NOT fit: 2014-2016 MDX; 2022+ MDX.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, DRL, turn: built-in LED
• Housing: Black (A-Spec)
• Bulb: included per listing (type not stated)
• LED control module: NOT included (per listing); reuse the modules from your factory headlights
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 33150TZ5A91. Partslink: .

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights

Installation

1. Open the hood and remove the 10 clips on the crossmember cover and the 8 upper bumper clips.
2. From underneath, remove the 8 screws and 6 clips holding the bumper and splash shield.
3. In each wheel well remove the 3 liner screws and, on 2017+ models, the 2 corner screws threaded from below.
4. Release the fender clips and the clips under the headlights, pull the bumper forward and unplug the fog lights and washer hoses.
5. Remove the headlight bolts, pull the lamp forward and unplug it.
6. Install the new headlights and tighten the bolts to 9.3 N·m (6.9 lb-ft), refit the bumper, test every function and aim.

Steps compiled from the Remont-bampera Acura MDX 2014-2020 bumper removal guide, the Go-Parts 2017-2020 MDX headlight guide and the Acura service bulletin headlight procedure (bolt torque). Professional installation and headlight aiming are recommended.

FAQs

Will these fit a 2016 MDX?
No. The 2017 facelift uses a different headlight, so 2014-2016 lamps do not swap.

Is the LED module included?
No. Per the listing, reuse your factory modules.

Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper comes off to reach the headlight bolts.

What bulbs do these use?
None to buy for the headlights. Low and high beams are built-in LED.

Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.