Black LED Headlights Pair for Lincoln MKX (2016-2018)

Black LED Headlights Pair for Lincoln MKX (2016-2018)

$938.95
Ir directamente a la información del producto
Black LED Headlights Pair for Lincoln MKX (2016-2018)

Black LED Headlights Pair for Lincoln MKX (2016-2018)

$938.95
DS-FA1Z13008N

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Fitment warning: These headlights fit 2016-2018 Lincoln MKX models with factory LED lamps and without auto-leveling only. They will not fit factory HID headlights. The LED control module is not included — reuse your factory module. Confirm your lamps match these photos before ordering.

Replace faded or cracked factory LED lamps on your 2016-2018 Lincoln MKX with this black-housing pair. Each lamp is a sealed LED assembly, bolts to the factory points, and plugs into the factory connectors, with no splicing, once you transfer your original LED module.

Important Fitment Note: Fits 2016-2018 Lincoln MKX factory LED headlights without auto-leveling only (Black Label, Premiere, Reserve, and Select). Not HID. The LED control module is not included; reuse your factory module. The low and high beams are sealed LED — there are no replaceable headlight bulbs.

Fitment

YEAR MAKE / MODEL FITS
2016-2018 Lincoln MKX Factory LED without auto-leveling only. Not HID. LED module not included.

Specs

  • Sold as: driver and passenger pair (two lamps)
  • Housing: black, clear lens, sealed LED
  • Lighting: sealed LED (not a replaceable bulb)
  • Auto-leveling: no
  • LED control module: not included; reuse your factory module
  • DOT and SAE compliant
  • Plugs into the factory connectors (no splicing) after the factory module is transferred

Interchange

Replaces / cross-references: FA1Z13008R, FA1Z13008N, FA1Z13008D, FA1Z13008J, FO2502354, FO2503354

What's included

  • 1x driver side (left) LED headlight (FA1Z13008N)
  • 1x passenger side (right) LED headlight (FA1Z13008R)
  • LED control module is not included — reuse your factory module

Installation — 2016-2018 Lincoln MKX

Tools: socket set, screwdrivers, plastic trim tools, and a helper for the bumper cover. Estimated time: about 1.5 to 3 hours.

  1. Park on level ground, open the hood, turn the lights and ignition off, and disconnect the negative battery cable. On the 2016-2018 MKX the front bumper cover typically comes off, or at least is loosened, so you can reach the headlight bolts.
  2. Remove the fasteners across the top of the bumper and grille, the screws in each front wheel well, and the bolts along the lower edge, then release each bumper corner from the fender.
  3. With a helper, ease the cover forward, unplug any fog-lamp or similar connectors, and set the cover on a soft surface.
  4. Unplug the factory connectors, remove the mounting bolts, and lift each lamp out. Leave the factory LED control module with the vehicle so you can transfer it.
  5. Transfer your original LED module to the new housing, set the lamp in place, install the bolts, and reconnect the factory connectors. Repeat on the other side.
  6. Refit the bumper cover and all fasteners, reconnect the battery, test the LED low and high beams and the turn signals, then aim the beams on a level surface.

Buyer FAQ

Will these fit a 2016-2018 Lincoln MKX with factory HID headlights, or lamps with auto-leveling? No. These fit 2016-2018 MKX models with factory LED headlights and no auto-leveling only. They will not fit factory HID lamps. The LED control module is not included; reuse your factory module.

Are the LED modules or replaceable headlight bulbs included? No. These are sealed LED assemblies — there are no replaceable headlight bulbs in the housings. The LED control module is not included; transfer your original factory module to the new lamps.

Do they plug into the factory connectors? Yes. They bolt to the factory points and plug into the factory connectors, with no splicing, once your original LED module is transferred. Replaces FA1Z13008R, FA1Z13008N, FA1Z13008D, FA1Z13008J, FO2502354, and FO2503354.

También te puede interesar