Black LED Projector Headlights Pair for Peterbilt 579 587 (2010-2021)
$648.95
Ir directamente a la información del producto
Black LED Projector Headlights Pair for Peterbilt 579 587 (2010-2021)
$648.95
DS-P546163110
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit first-generation Peterbilt 579 trucks (2012-2021) and Peterbilt 587 trucks (2010-2016) that use this aero headlight housing. They will not fit the redesigned 2022-up 579, which has a different headlight. They also will not fit 388, 389, 367, 567, or other Peterbilt models. Compare your current lamps with our photos before ordering.
Upgrade the front of your Peterbilt 579 or 587 with this black LED projector pair. Each lamp has built-in LED high and low beam, a wraparound LED DRL, an amber LED turn signal, and a side marker, and it mounts in the factory aero headlight opening. Sold as a driver and passenger pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2012-2021 | Peterbilt 579 | First-generation aero housing only; not the 2022-up refresh |
| 2010-2016 | Peterbilt 587 | Same aero headlight housing as the first-generation 579 |
Specs
- Condition: New
- Sold as: Driver and passenger pair
- Lighting: LED projector, high and low beam, with LED DRL, turn signal, and side marker
- Housing: Black, clear lens
- Operating voltage: 12V
- Certification: DOT-certified
- Warranty: 1 year
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
P54-6163-110R, P54-6163-100
Installation: Peterbilt 579 (2012-2021) and 587 (2010-2016)
On a 579 or 587 the headlight is reached from the engine bay with the hood open. You usually do not need to remove the bumper. Professional installation and beam aiming are recommended.
- Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. From the engine bay, unplug the harness at the back of the old assembly.
- Remove the mounting bolts that hold the lamp to the front header (typically a few bolts at the top and inner side). Support the assembly as you take out the last bolt, then slide it forward off the alignment pins.
- Set the new assembly on the same pins, start the bolts by hand, and snug them evenly. Do not overtighten the housing ears. Reconnect the factory harness until it clicks.
- Repeat on the other side, reconnect the battery, and test high beam, low beam, the DRL, the turn signal, and the side marker. Aim the lamps on level ground before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
First-generation Peterbilt 579 (2012-2021) and Peterbilt 587 (2010-2016) with this aero headlight housing. Compare your current lamps with our photos before ordering.
Will they fit a 2022 or newer 579?
No. The redesigned 2022-up 579 uses a different headlight and is not covered.
Will they fit a 567, 388, or 389?
No. Those models use a different housing. This pair is for the 579 and 587 aero opening only.
Do I need bulbs?
No. The LED light sources for high beam, low beam, DRL, turn, and side marker are built into each assembly.
Are these a complete pair?
Yes. You get the driver-side and passenger-side headlight assemblies.