Black LED Projector Headlights Pair w/ Halogen Turn Signal & LED Module for Dodge Durango (2021-2026)

Replace hazy or damaged headlights on your 2021-2026 Dodge Durango with LED headlights and a halogen turn signal with this new black-bezel pair. Bulbs and LED module included per the listing.

Fitment

Will NOT fit: Durango with full LED headlights and LED turn signals (7-pin); 2014-2020 Durango.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, running lights: built-in LED
• Turn signal: 7444NA bulb (included, per listing photo)
• Bezel: Black
• LED module included (per listing)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 68433778AF, 68433779AB, 68433779AC, 68433779AD, 68433779AE, 68433778AB, 68433778AC, 68433778AD, 68433778AE. Partslink: CH2502344 CH2503344.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• 7444NA turn signal bulbs (per listing)

Installation

1. Open the hood, remove the hood seal, the side closeout panels and the upper grille clips.
2. Remove the fascia fasteners and rivets on both sides, the wheel-arch moldings and the lower fasteners; disconnect the fascia harnesses and release the fascia from the headlamp brackets and fender clips.
3. Remove the two 10 mm bolts under the lamp and the two through the fender bracket, unplug the harnesses, remove the hood-seal section and corner sight shield, then the final top bolt.
4. Install the new lamp, reconnect, reinstall the fascia and aim the headlights.

Steps compiled from DodgeDurango.net "21-23 bumper-front removal" (Mopar procedure PDF); YouTube "How To EASILY Remove Dodge Durango Headlight 2011-2025"; Go-Parts Durango headlight guide. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a Durango with full LED headlights?
No. The listing photo shows these match the LED headlight with halogen turn signal (5-pin) type, not the full LED with LED turn signal (7-pin) type.

What bulb is the turn signal?
The listing photo shows a 7444NA turn signal bulb, included.

Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia comes off to reach the headlamp bolts.

Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.