Black LED Projector Headlights Pair w/ LED DRL & Module for Ford Expedition (2018-2021)

Replace hazy or damaged factory LED headlights on your 2018-2021 Ford Expedition with this new black-projector-cover LED pair. LED DRL and LED module included per the listing.

Fitment

Will NOT fit: Expeditions with the chrome (plated) projector cover lamp, per the listing photo; halogen models; 2022+ Expedition.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low/high beam, DRL, turn: built-in LED
• Projector cover: Black
• LED module included (per listing)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: JL1Z13008K, JL1Z-13008-A, JL1Z-13008-D. Partslink: .

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights

Installation

1. Remove both front wheels to reach the inner fender retainers, then remove the front bumper cover.
2. Remove the grille: three bolts per side (one on top, one on the leg behind the fender, one lower by the grille), then release the grille clips at the headlights.
3. Remove the headlamp securing bolts, pull the lamp forward and unplug it.
4. Install the new lamps, test every function, then refit the grille and bumper cover and aim. Tape the fender edges and have a helper for the bumper clips.

Steps compiled from the Ford Expedition owner's manual "Removing a Headlamp" section, the ExpeditionForum.com "2018 Expedition headlight assembly removal" thread and the ExpeditionForum.com headlight replacement thread (FSM steps). Professional installation and headlight aiming are recommended.

FAQs

Will these fit an Expedition with chrome projector covers?
No. The listing photo shows the black projector cover as the match and the plated cover as not a match.

Is the LED module included?
Yes, per the listing (LED module and LED DRL included).

Do I need to remove the front bumper to replace these headlights?
Yes. On this generation the front bumper cover and grille come off before the headlamp bolts can be reached.

What bulbs do these use?
None to buy for the headlights. Low and high beams are built-in LED.

Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.