Black LED Sequential Headlights Pair for Chevrolet Corvette C6 (2005-2013)

Update a 2005-2013 Corvette C6 with a black full-LED pair that keeps the original C6 outline and adds a sequential LED turn signal. You get driver and passenger assemblies with a clear lens and black housing. High beam, low beam, daytime running light, and the turn signal are all LED — no separate bulbs to transfer.

Fitment

Specs

• Sold as: a driver and passenger pair
• Style: black housing, clear lens, original C6 outline, full LED with sequential turn signal
• Lighting: LED high beam, LED low beam, LED daytime running light, and sequential LED turn signal
• 12 V
• New aftermarket assemblies

In the Box

• Driver and passenger black LED sequential headlights
• Structural and functional guidelines

Interchange References

Replaces original-style 2005-2013 Corvette C6 headlights commonly crossed with 15876060, 15876061, 20789677, 20789678, GM2502334, and GM2503334.

Installation: Chevrolet Corvette C6 (2005-2013)

On the C6 the headlight sits in the front fascia opening, and some of the fasteners are easier to reach if you slide the fascia forward or support it after loosening the fender and bumper bolts. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Raise and support the front of the car if you need extra room, then loosen the fascia fasteners at the fender and along the bumper so you can reach the headlight bolts.
2. Support the lamp, remove the mounting bolts, and pull the assembly forward. Disconnect the factory harness.
3. Connect the new LED headlight to the factory connector. Follow the included guidelines if a load resistor or extra plug is specified for the sequential turn signal.
4. Seat the housing in the C6 opening and reinstall the bolts. Repeat on the other side, then refasten the fascia.
5. Reconnect the battery and check low beam, high beam, the daytime running light, and the sequential turn signal on both sides. Aim the headlights on a level surface before driving at night.

Frequently Asked Questions

Which vehicles does this pair fit?
Chevrolet Corvette C6 (2005-2013) that use this C6-outline headlight. Compare your current housings with our photos before ordering.

Is this a C7-style conversion?
No. This pair keeps the original C6 headlight outline and adds sequential LED turn signals. It is not a C7-style conversion.

Are bulbs included?
No separate bulbs are required. High beam, low beam, daytime running light, and the sequential turn signal are all LED.

Do the turn signals run sequentially?
Yes. The outboard LED elements sweep as a sequential turn signal. That function is visible on the product photos.