Chrome Halogen Headlights Pair for Ford Escape (2005-2007)

Replace faded or cracked factory halogen lamps on your 2005-2007 Escape with this OE-style chrome-housing pair. Each lamp has the halogen low and high beam and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your H11 low-beam and H7 high-beam bulbs, or add new ones.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing: chrome, clear lens, amber side marker
• Low beam: H11; high beam: H7
• Bulbs not included — reuse your bulbs
• Plugs into the factory connectors (no splicing)

In the Box

• Driver-side halogen headlight
• Passenger-side halogen headlight

Interchange References

Replaces the original assemblies commonly crossed with 7L8Z-13008-A, 7L8Z-13008-D, FO2518102, FO2519102.

Installation: Ford Escape (2005-2007)

On the 2005-2007 Escape the grille and inner-fender fasteners are loosened, and the bumper cover is often loosened or removed, so you can reach the headlight bolts. Work with a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.

1. Open the hood. Remove the grille fasteners and ease the grille forward enough to reach the inner headlight bolts.
2. Loosen or remove the bumper cover and inner-fender fasteners as needed to reach the remaining bolts.
3. Unplug the headlight connector, remove the mounting bolts and lift the lamp out.
4. Transfer your H11 and H7 bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
5. Refit the grille and bumper fasteners, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.

Frequently Asked Questions

Which vehicles do these headlights fit?
2005-2007 Ford Escape and Escape Hybrid with factory halogen headlights. They do not fit 2001-2004 or 2008-2012 Escape.

Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Will these fit a 2008-2012 Escape?
No. 2008-2012 uses a different lamp. Use the 2008-2012 Escape halogen pair for that generation.

Are bulbs included?
No. Reuse your H11 low-beam and H7 high-beam bulbs, or add new ones.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.

How are they installed on a 2005-2007 Ford Escape?
The grille and inner-fender fasteners are loosened, and the bumper cover is often loosened or removed, so you can reach the headlight bolts. Then unplug the lamp, transfer your bulbs if you are reusing them, install the new lamp and aim the beams.