Chrome Halogen Headlights Pair for Freightliner Cascadia (2008-2017)

Replace faded or cracked first-generation Cascadia headlights with this chrome halogen pair. Each lamp has the original teardrop shape, a clear lens, and a built-in amber side marker, so the front of the truck looks factory-correct. H11 bulbs are included and pre-installed, ready to bolt into the same opening used on 2008-2017 Cascadia and Cascadia Evolution trucks.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: chrome housing, clear lens, amber side marker
• Lighting: halogen low and high beam, H11 bulbs included and pre-installed
• DOT / SAE marked on the lens
• Connects to the factory headlight connector, no splicing
• New aftermarket assemblies

Bulb sizes: H11 low beam and H11 high beam, included. The amber side marker uses a replaceable bulb in the housing; match a replacement to the socket on your lamp.

In the Box

• Driver-side headlight assembly with bulbs
• Passenger-side headlight assembly with bulbs

Interchange References

Replaces the original first-generation Cascadia housings used under A06-51907-006 (driver) and A06-51907-007 (passenger).

Installation: Freightliner Cascadia (2008-2017)

On 2008-2017 Cascadia and Evolution trucks the headlights sit in the hood opening, and you can reach them with the hood tilted forward. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Tilt the hood open and support it. If a mounting bolt is blocked, remove the grille for better access.
2. Unplug the factory harness from the back of the old assembly. Remove the retaining bolts that hold the headlight in the hood opening and lift the housing out. Do not pull on the wiring.
3. Set the new assembly in the same opening, start the bolts, and connect the factory headlight connector.
4. Repeat on the other side, reinstall the grille if you removed it, reconnect the battery, and test low beam, high beam, and the amber side marker. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which trucks do these headlights fit?
Freightliner Cascadia and Cascadia Evolution trucks from 2008 through 2017 with the original teardrop headlight housing. Compare your current lamps with our photos before ordering.

Will they fit a 2018 or newer New Cascadia?
No. 2018 and newer New Cascadia trucks use a different, more angular headlight and these assemblies will not interchange.

Are bulbs included?
Yes. H11 bulbs for low and high beam are pre-installed in each assembly.

Are these a bulb kit or complete assemblies?
These are complete driver and passenger headlight assemblies, not a bulb-only kit. They replace the entire factory housing.

How are they installed on a 2008-2017 Cascadia?
Tilt the hood, unplug the factory connector, unbolt the housing from the hood opening, and set the new lamp in the same place. Remove the grille only if you need more room to reach a bolt. Aim the lamps before nighttime driving.