Chrome Halogen Headlights Pair for Mercedes-Benz E-Class (2010-2013)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace faded or cracked factory halogen lamps on your 2010-2013 Mercedes-Benz E-Class (W212) with this chrome-housing pair. Each lamp uses halogen low and high beams, includes the bulbs, bolts to the factory points, and plugs into the factory connectors, with no splicing.
Important Fitment Note: Fits sedan and wagon factory halogen models only (E350 and E550 for 2010-2013, E400 for 2013). Not HID. Not the two-door coupe. No cornering lamps.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2010-2013 | Mercedes-Benz E350 | Sedan and wagon, factory halogen only. Not HID. Not coupe. |
| 2010-2013 | Mercedes-Benz E550 | Sedan and wagon, factory halogen only. Not HID. Not coupe. |
| 2013 | Mercedes-Benz E400 | Sedan and wagon, factory halogen only. Not HID. Not coupe. |
Specs
- Sold as: driver and passenger pair (two lamps)
- Housing: chrome, clear lens
- Low beam: halogen, H7 bulbs included
- High beam: halogen, H7 bulbs included
- Turn signal: PY21W bulbs included
- Position lamp: W5W bulbs included
- Cornering lamps: no
- DOT and SAE compliant
- Plugs into the factory connectors (no splicing)
Interchange
Replaces / cross-references: 2128209561, 2128209661, MB2502182, MB2503182
What's included
- 1x driver side (left) halogen headlight (2128209561)
- 1x passenger side (right) halogen headlight (2128209661)
- H7 low- and high-beam bulbs (installed)
- PY21W turn-signal bulbs (installed)
- W5W position bulbs (installed)
Installation — 2010-2013 Mercedes-Benz E-Class (W212)
Tools: socket set, screwdrivers, plastic trim tools, and a helper for the bumper cover. Estimated time: about 1.5 to 3 hours.
- Park on level ground, open the hood, turn the lights and ignition off, and disconnect the negative battery cable. On the 2010-2013 E-Class (W212) the front bumper cover typically comes off so you can reach the headlight bolts.
- Remove the fasteners across the top of the bumper and grille, the screws in each front wheel well, and the bolts along the lower edge, then release each bumper corner from the fender.
- With a helper, ease the cover forward, unplug any fog-lamp or similar connectors, and set the cover on a soft surface.
- Unplug the headlight connectors, remove the mounting bolts, and lift each lamp out.
- Set the new lamp in place, install the bolts, and reconnect the factory connectors. Repeat on the other side.
- Refit the bumper cover and all fasteners, reconnect the battery, test low beam, high beam, turn, and position lamps, then aim the beams on a level surface.
Buyer FAQ
Will these fit a Mercedes E-Class with factory HID headlights, or a two-door coupe? No. These fit 2010-2013 E350 and E550, and 2013 E400, sedan and wagon models with factory halogen headlights only. They will not fit factory HID lamps or the two-door coupe.
Are bulbs included? Yes. Each lamp includes H7 low-beam and high-beam bulbs, a PY21W turn-signal bulb, and a W5W position bulb. These housings do not have cornering lamps.
Do they plug into the factory connectors? Yes. They bolt to the factory points and plug into the factory connectors, with no splicing. Replaces 2128209561, 2128209661, MB2502182, and MB2503182.