Chrome Halogen Headlights Pair w/ LED DRL for Buick Regal (2011-2013)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace hazy or damaged headlights on your 2011-2013 Buick Regal with this new chrome halogen pair with LED DRL. Bulbs included per the listing.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2011-2013 | Buick Regal with factory halogen headlights | Factory halogen headlights |
Will NOT fit: Regal with HID/AFS headlights; Regal GS; 2014+ Regal.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: H7 (per listing photo)
- Turn signal: PY21W
- DRL: LED
- Load resistor shown in listing photo
- Housing: Chrome
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 22794766, 13226799, 13226800. Partslink: GM2503353, GM2502353.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- Bulbs (per listing)
Installation
- Remove the front wheelhouse liner fasteners and the 6 upper fascia fasteners.
- Loosen the 2 impact-bar bolts, remove the 4 retainers and release the fascia sides; unplug and pull the fascia.
- Remove the headlamp 7 mm screws, pull the lamp forward and unplug it.
- Install the new lamps, refit the fascia, test every function and aim the headlights.
Steps compiled from the 2012 Regal GM front fascia procedure via lemon-manuals, the Go-Parts Regal headlight guide and RegalForums.com. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a Regal with HID headlights?
No. Halogen models only.
Does the connector plug straight in?
On some cars the connector may need rotating; verify the pins match before powering up.
What bulbs do these use?
H7 low/high and PY21W turn per the listing photo chart, included.
Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward. Listing-backed size: H7.
Do I need to remove the front bumper to replace these headlights?
Yes. The front fascia comes off to reach the lamp screws.