Chrome Halogen Headlights Pair w/ LED DRL for Ford Focus (2015-2018)

Replace hazy or damaged headlights on your 2015-2018 Ford Focus with this new chrome halogen pair with LED DRL.

Fitment

Will NOT fit: Focus with HID headlights or halogen without LED DRL; 2012-2014 Focus.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Type: halogen reflector
• DRL: built-in LED
• Housing: Chrome
• Bulbs: not included; The listing does not state the bulb sizes; reuse or match your factory bulbs.
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: F1EZ13008GV, F1EZ-13008-E, F1EZ-13008-C. Partslink: FO2503340, FO2502340.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights

Installation

1. Disconnect the battery and open the hood.
2. Remove the T30 Torx bolts holding the headlamp at the grille side and fender side. If needed, remove the wheel-arch screws and loosen the bumper corner for clearance.
3. Pull the lamp forward and unplug the connector.
4. Fit the new lamp, refit the bolts and any bumper fasteners, and aim the headlights.

Steps compiled from Scegliauto Ford Focus Mk3 headlight video and Focus Fanatics headlamp threads. Professional installation and headlight aiming are recommended.

FAQs

Will these fit a Focus without LED DRL?
No. These are the LED DRL version; match your factory lamp.

What bulbs do these use?
No bulbs are included and the listing does not state sizes. Move over or match your factory bulbs.

Can I install LED or HID kits?
Yes. This is a halogen housing, so a plug-in LED or HID kit in your factory bulb size can be used. Aim the headlights afterward.

Do I need to remove the front bumper to replace these headlights?
Usually the bumper cover is loosened or removed to reach the lower headlamp bolt.