Chrome Halogen Headlights Pair with Corner Lights and Bezels for Mack CH (1990-2005) / CL (1991-2007)
$295.95
Ir directamente a la información del producto
Chrome Halogen Headlights Pair with Corner Lights and Bezels for Mack CH (1990-2005) / CL (1991-2007)
$295.95
DS-25163253
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit Mack CH 600, CH 612, and CH 613 (1990-2005) and Mack CL 600 and CL 700 (1991-2007) trucks that use this combination-type set-back axle (SBA) headlight, amber corner lamp, and chrome bezel. They will not fit set-forward axle (SFA) hoods, 2006-up CH, or Pinnacle/CX models. Compare your hood opening and current lamps with our photos before ordering.
Replace faded CH or CL set-back-axle headlights with a chrome halogen pair. You get driver and passenger combination assemblies with a clear rectangular headlamp, an amber corner lamp, and a chrome bezel, plus included 9007 (HB5) bulbs for high and low beam.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 1990-2005 | Mack CH600 | Combination-type set-back axle (SBA) only; not SFA |
| 1990-2005 | Mack CH612 | Combination-type set-back axle (SBA) only; not SFA |
| 1990-2005 | Mack CH613 | Combination-type set-back axle (SBA) only; not SFA |
| 1991-1999 | Mack CL600 | Combination-type set-back axle (SBA) only; not SFA |
| 1991-2007 | Mack CL700 | Combination-type set-back axle (SBA) only; not SFA |
Specs
- Sold as: a driver and passenger pair
- Style: chrome bezel, clear rectangular halogen headlamp, amber corner lamp
- Lighting: halogen high and low beam, 9007 (HB5) bulbs included
- 12 V
- New aftermarket assemblies
In the Box
- Driver and passenger chrome halogen headlights with amber corner lamps and bezels
- 2 9007 (HB5) headlight bulbs
Interchange References
Replaces original-style CH and CL set-back-axle combination headlights commonly crossed with 25163253, 25154252, 8885501, 8885502, MK2502100, and MK2503100.
Installation: Mack CH (1990-2005) and CL (1991-2007), set-back axle
On these SBA trucks the combination headlight and amber corner sit in a chrome bezel in the hood opening. Confirm your hood is the set-back-axle style before you start — an SFA hood uses a different opening and will not accept this lamp. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it. Unplug the headlight and corner-lamp connectors.
- Remove the screws or bolts that hold the chrome bezel and the combination assembly in the hood opening. Lift the old lamp out. Do not force frozen hardware — have a shop extract a broken screw rather than crack the hood or bezel.
- Install the included 9007 (HB5) bulb in each new headlight and confirm the corner-lamp bulb is seated if you are transferring one.
- Set the new assembly in the hood opening, start all fasteners by hand, then tighten them evenly so the bezel sits flush to the hood.
- Reconnect the connectors and the battery. Test high beam, low beam, and the amber corner lamp. Aim the headlights on a level surface before driving at night.
Frequently Asked Questions
Which trucks does this pair fit?
Mack CH 600, CH 612, and CH 613 (1990-2005) and Mack CL 600 and CL 700 (1991-2007) with combination-type set-back axle (SBA) headlights. Compare your hood opening with our photos before ordering.
Will it fit a set-forward axle (SFA) Mack?
No. An SFA hood uses a different headlight opening. Do not order this pair for SFA trucks, 2006-up CH, or Pinnacle/CX models.
Are bulbs included?
Yes. Each pair includes two 9007 (HB5) headlight bulbs.
Is this just the headlight, or does it include the bezel and corner lamp?
Each side is a combination assembly: the rectangular headlamp, amber corner lamp, and chrome bezel. You get both sides.