Chrome Halogen Projector Headlights Pair for Jeep Renegade (2015-2018)
$112.95
Ir directamente a la información del producto
Chrome Halogen Projector Headlights Pair for Jeep Renegade (2015-2018)
$112.95
DS-68256567AA
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit the 2015-2018 Jeep Renegade with factory halogen headlights (68256567AA / 68256570AA). They will not fit factory HID lamps (used on some 2017-2018 trims) and they will not fit the 2019 and newer Renegade facelift, which uses a different lamp.
Replace faded or cracked factory halogen lamps on your 2015-2018 Renegade with this OE-style chrome-housing projector pair. Each lamp has a dual-beam halogen projector and an amber side marker, and it bolts to the factory points and plugs into the factory connectors, with no splicing. Reuse your 9008 dual-beam bulbs, or add new ones.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2015-2018 | Jeep Renegade | Factory halogen only. Not HID. Not 2019+ facelift. |
Specs
- Sold as: driver and passenger pair
- Housing: chrome, clear lens, amber side marker
- Low and high beam: 9008 dual-beam
- Bulbs not included — reuse your bulbs
- Plugs into the factory connectors (no splicing)
In the Box
- Driver-side halogen projector headlight
- Passenger-side halogen projector headlight
Interchange References
Replaces the original halogen assemblies commonly crossed with 68256567AA, 68256570AA, CH2502273, CH2503273.
Installation: Jeep Renegade (2015-2018)
On the 2015-2018 Renegade the front bumper cover comes off so you can reach the headlight bolts. Work with a helper and a shop manual for your year. Turn the lights and ignition off, disconnect the negative battery cable, and wait a few minutes before unplugging the lamp.
- Open the hood. Remove the clips and fasteners along the top of the bumper cover and grille.
- Remove the fasteners in each front wheel liner and at the bumper corners, then set the cover aside.
- Unplug the headlight connector, remove the mounting bolts, and lift the lamp out.
- Transfer your 9008 dual-beam bulbs if you are reusing them. Set the new lamp in place, start the bolts by hand, tighten them evenly, and reconnect the factory plug.
- Refit the bumper cover, reconnect the battery, and test low beam, high beam and turn signal before you drive. Aim the beams after installation.
Frequently Asked Questions
Which vehicles do these headlights fit?
2015-2018 Jeep Renegade with factory halogen headlights. They do not fit factory HID lamps or the 2019 and newer facelift.
Is this a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.
Will these fit a factory HID Renegade?
No. These are halogen lamps (68256567AA / 68256570AA). Factory HID uses a different housing.
Are bulbs included?
No. Reuse your 9008 dual-beam bulbs, or add new ones.
Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory connectors.