Chrome Halogen Tail Lights Pair for GMC Sierra 1500 (2014-2018)
$100.95
Ir directamente a la información del producto
Chrome Halogen Tail Lights Pair for GMC Sierra 1500 (2014-2018)
$100.95
DS-84288724-CHR
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace worn, cracked or fogged tail lights on your 2014-2018 GMC Sierra 1500 with this chrome halogen pair. Direct-fit replacement using the factory mounting points and connector.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2014-2018 | GMC / Sierra 1500 | halogen models |
Signs you need new tail lights
- Cracked, faded or hazy lens
- Water or condensation inside
- Broken mounting tabs or failed LED sections
Specs
- Style: chrome halogen
- Light source: Halogen
- Bulbs: reuse factory bulbs — sizes not stated by supplier
- Housing: Chrome; lens: Red
- DOT / SAE compliant (per supplier)
- Warranty: 1 year
Interchange
Replaces / cross-references: 84288724, 84288725, 23424737, 23424738, GM2800281, GM2801281, GM2800262, GM2801262, 23295940, 84019504, 23295941.
What's included
- 1 x driver side (left) tail light
- 1 x passenger side (right) tail light
Installation — 2014-2018 GMC Sierra 1500
Tools: T15 Torx driver, plastic trim tool. About 15-20 minutes per side.
- Lower the tailgate. On the inner edge of the tail light remove the two T15 Torx screws.
- Pull the lamp straight rearward to release the outer pins from the bed-side grommets; pry gently with a plastic tool if tight.
- Disconnect the electrical connector (and, on halogen trucks, twist out the bulb sockets).
- For the LED upgrade, connect the included adapter harness/resistor to the truck plug and mount the resistor away from plastic and wiring.
- Seat the new lamp, refit the T15 screws and test tail, brake, turn and reverse.
FAQ
What does this fit?
Fitment is verified from the supplier listing for: 2014-2018 GMC Sierra 1500.
What bulbs does it use?
The supplier does not state bulb sizes; reuse the bulbs from your factory lamps.
What tools do I need?
T15 Torx driver, plastic trim tool.
Is this sold as a pair?
Yes — 1 x driver side (left) tail light; 1 x passenger side (right) tail light.
Do I need the resistor/harness?
On factory halogen (bulb) trucks, yes: it adapts the plug and prevents hyper-flash. The resistor gets hot in use, so mount it on metal away from plastic.