Chrome Halogen Tail Lights Pair for GMC Sierra 1500 2500HD 3500HD (2007-2013)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace worn, cracked or fogged tail lights on your 2007-2013 GMC Sierra 1500 / 2007-2013 GMC Sierra 2500 HD / 2007-2013 GMC Sierra 3500 HD with this chrome halogen pair. Direct-fit replacement using the factory mounting points and connector.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2007-2013 | GMC / Sierra 1500 | As listed |
| 2007-2013 | GMC / Sierra 2500 HD | As listed |
| 2007-2013 | GMC / Sierra 3500 HD | As listed |
Signs you need new tail lights
- Cracked, faded or hazy lens
- Water or condensation inside
- Broken mounting tabs or failed LED sections
Specs
- Style: chrome halogen
- Light source: Halogen
- Bulbs: included
- Housing: Chrome; lens: Red
- DOT / SAE compliant
- Warranty: 1 year
Interchange
Replaces / cross-references: 25958484, 25958485, GM2800208, GM2801208, 15206399, 25877456, 25906844, 15206400, 25877457, 25906845.
What's included
- 1 x driver side (left) tail light
- 1 x passenger side (right) tail light
Installation — 2007-2013 GMC Sierra 1500 / 2007-2013 GMC Sierra 2500 HD / 2007-2013 GMC Sierra 3500 HD
Tools: Phillips or 7 mm socket, plastic trim tool. About 15-20 minutes per side.
- Lower the tailgate to expose the two screws on the inner edge of the tail light.
- Remove the two screws (Phillips/7 mm on most trucks).
- Pull the lamp straight rearward to release the outer ball-stud clips from the bed-side grommets.
- Squeeze the lock tab and unplug the harness connector, then twist out the bulb sockets.
- Install the sockets in the new lamp, plug in, press the lamp onto the clips and refit the two screws.
- Test tail, brake, turn and reverse before closing the tailgate.
FAQ
What does this fit?
Fitment is verified from the supplier listing for: 2007-2013 GMC Sierra 1500 / 2007-2013 GMC Sierra 2500 HD / 2007-2013 GMC Sierra 3500 HD.
What bulbs does it use?
The supplier does not state bulb sizes; reuse the bulbs from your factory lamps.
What tools do I need?
Phillips or 7 mm socket, plastic trim tool.
Is this sold as a pair?
Yes — 1 x driver side (left) tail light; 1 x passenger side (right) tail light.
Do I have to remove the bumper?
No. On this truck the tail light is held by two screws behind the tailgate and two push-in ball studs.