Chrome HID Headlights Pair w/ AFS for Infiniti M37 M56 (2011-2013) & Q70 (2014)

Replace yellowed or cracked headlights on your 2011-2013 Infiniti M37/M56 or 2014 Q70 with this brand-new chrome HID pair with AFS (adaptive front lighting). Reuse your factory bulbs and ballasts.

Fitment

Will NOT fit: Non-AFS models; 2015+ Q70 facelift; halogen cars.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: HID, match your factory bulbs (reuse them)
• AFS: Yes
• Housing: Chrome
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 260601MA1D. Partslink: IN2502155, IN2503155.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• HID bulbs and ballasts are NOT included; reuse your factory ones

Installation

1. Disconnect the negative battery cable (factory xenon system, high voltage).
2. Open the hood and remove the six push clips along the top of the front bumper.
3. Above each headlamp, fold back the seal, remove the one screw each side and the plastic retainers.
4. From underneath, remove the twelve lower bumper screws; turn the wheels outward and release the front of the fender protectors.
5. Remove the one corner screw each side (behind the fender protector), release the fender clips and the clips under the headlamps.
6. With a helper, pull the bumper forward, unplug the fog/sensor connectors and headlamp-washer hoses if equipped.
7. Unplug the headlamp connectors, remove the headlamp mounting bolts and lift the lamp out.
8. Transfer your factory D2S bulbs (Y51 factory xenon bulb per owner guide) and ballasts, install in reverse and have the aim checked.

Steps compiled from Remont-bampera Infiniti M/Q70 (Y51) 2010-2019 bumper removal guide; NICOclub "Access and Replace ALL Bulbs - M37/M56/Q70" (Y51 xenon procedure and battery warning). Professional installation and headlight aiming are recommended.

FAQs

Does this fit cars without AFS?
No. AFS cars only; see our non-AFS version.

Does it fit the 2015+ Q70?
No. Fitment is 2011-2013 M and 2014 Q70 per the listing.

Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper comes off to reach the headlamp bolts.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.