Chrome HID Projector Headlights Pair w/ AFS for Lexus ES350 (2010-2012)

Replace yellowed, cracked, or damaged headlights on your 2010-2012 Lexus ES350 with this brand-new pair of chrome HID/Xenon projector headlight assemblies with AFS. Half assembly: reuse your factory HID bulbs and ballasts.

Fitment

Will NOT fit: Halogen ES350; HID cars without AFS; 2007-2009 ES350; 2013+ ES350.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Lens: Clear
• Low beam: HID/Xenon projector (bulb not included)
• AFS: adaptive swivel projector
• Corner: amber
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 8114533750. Partslink: LX2503149, LX2502149.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Half assembly: HID bulbs, ballasts, and high-voltage wires are NOT included; reuse yours

Installation

1. Open the hood, remove the push-pin clips and the 10 mm bolts across the top of the radiator support between the headlights.
2. From underneath, remove the push clips and any 10 mm bolts along the lower edge of the bumper cover.
3. At each front wheel opening remove the screw/10 mm bolt that goes straight up into the fender at the bumper seam, plus the wheel-liner screws into the cover.
4. Pry the cover sides out from the fenders, free the grille section and the plastic grips under the headlights, then unplug the fog lights. Only the cover comes off, not the bumper beam.
5. Remove the headlight bolts (lower ones are exposed with the cover off), unplug the headlight and AFS swivel connectors, and lift the lamp out.
6. Transfer HID bulbs, ballasts and igniters; do not over-turn the adjusters. Install in reverse and aim.

Steps compiled from Lexus Owners Club of North America and iFixit 2007-2012 ES headlight threads. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
The listing does not state bulb sizes. Half assembly: move your factory HID bulbs, ballasts and wiring over.

Will these fit a car without AFS?
No. HID cars with AFS only.

Will these fit a 2007-2009 ES350?
No. Those use a different headlight.

Do I need to remove the front bumper to replace these headlights?
Yes, the bumper cover (not the beam) has to come off to reach the headlight bolts on the 2007-2012 ES.

Can I reuse my old HID ballasts?
Yes. This is a half assembly; move your factory HID bulbs, ballasts and igniters over. Handle HID wiring with the lights off and battery disconnected.

Can I install LED or HID kits?
Not applicable. These are factory-style HID housings for HID/AFS cars; reuse your HID bulbs.