Chrome LED Headlights Pair for Ford Explorer Limited Platinum XLT (2016-2018)

Replace yellowed or cracked headlights on your 2016-2018 Ford Explorer Limited, Platinum or XLT with factory LED low beams with this brand-new chrome pair.

Fitment

Will NOT fit: Halogen-projector Explorer base; Explorer Sport; 2011-2015 or 2019 Explorer.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Housing: Chrome
• Low beam / running / side marker: LED
• Turn signal: 3757A
• High beam: HB3 (not included)
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: FB5Z13008N, FB5Z13008B. Partslink: FO2518130, FO2519130.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• 3757A turn bulb included; HB3 bulb and LED driver module not included

Installation

1. Disconnect the battery. Turn the steering wheel to full lock and remove the 5.5 mm/7 mm inner fender-liner fasteners at the front of the wheel well.
2. Remove the grille-area and upper fascia 10 mm bolts and the 8 mm bolts under the bumper, then the three fender-lip bolts reached through the liner.
3. Pull the front fascia forward (unplug fog/sensor connectors) to expose the headlamp; remove the 10 mm bolts on top and the three 10 mm bolts low behind the lamp.
4. Unplug and remove the lamp, transfer any needed bulbs/LED module, install the new lamp, refit the fascia and aim the headlights.

Steps compiled from Explorer Forum "2016 front bumper removal" and "Headlight Removal" threads, Ford owner manual (Removing a Headlamp). Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these headlights use?
Per the listing: LED low beam, running and side marker; 3757A turn signal included; HB3 high beam and LED module not included (reuse yours).

Do I need to move my LED module?
Yes. The LED driver module is not included; transfer it from your original headlights.

Do I need to remove the front bumper to replace these headlights?
Yes. Ford's owner manual says the front fascia must come off for 2016-2018 Explorer headlamp removal (about 2 hours labor).

Can I install HID or LED kits?
Only the halogen HB3 (9005) high beam can take a plug-in LED or HID bulb; the low beam is a built-in factory LED and is not serviceable with a kit.