Chrome LED Projector Headlights Pair for Ford F-250 F-350 Super Duty Halogen Models (2020-2022)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Upgrade the factory halogen headlights on your 2020-2022 Ford F-250/F-350 Super Duty to this new chrome LED projector pair. Harness, bulbs and modules included per the listing; adapter harnesses and load resistors shown in the listing photos.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2020-2022 | Ford F-250, F-350 Super Duty with factory halogen headlights (halogen-to-LED upgrade) | Factory halogen headlights |
Will NOT fit: Trucks with factory LED headlights; 2017-2019 and 2023+ Super Duty.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: built-in LED projector
- Housing: Chrome
- Included: adapter harness, modules (per listing); load resistors shown in photos
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: LC3Z13008B. Partslink: FO2502405, FO2503405.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Left and right headlights
- Adapter harnesses, modules (per listing)
Installation
- Remove the 14 push clips and lift off the radiator/grille cover.
- Remove the six 10 mm top grille bolts and the 10 mm bolts behind the side trim, then release the 4 lower grille clips and unplug the camera/washer if equipped.
- Loosen the bumper bolts if needed and remove the 13 mm bolt under the headlight, then the two 10 mm bolts on top; pull the lamp out and unplug.
- Connect the included adapter harness and resistors to the truck plug, install the new lamps, test every function (low, high, turn, DRL), refit the grille and aim.
Steps compiled from the Morimoto 2020-22 Super Duty headlight install guide (PDF), the Morimoto blog 2020+ Super Duty install and the Lightwerkz 2020-22 Super Duty halogen-to-LED notes. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a truck with factory LED headlights?
The listing is a halogen-to-LED upgrade for factory halogen trucks; factory-LED trucks are not covered.
Why are there resistors and adapter harnesses?
They connect the LED lamps to the halogen truck plug and help prevent hyper-flash or bulb-out warnings.
Do I need to remove the front bumper to replace these headlights?
The grille comes off; some trucks need the bumper lowered slightly for the lower bolt.
What bulbs do these use?
None to buy for the headlights. Low and high beams are built-in LED.
Can I install LED or HID kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.