Chrome Projector Headlights Pair with Halo for Peterbilt 388 389 (2008-2018)
$594.95
Ir directamente a la información del producto
Chrome Projector Headlights Pair with Halo for Peterbilt 388 389 (2008-2018)
$594.95
DS-P546087-HALO
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Fitment warning: These headlights fit Peterbilt 388 (2008-2015) and 389 (2008-2018) trucks that use this chrome projector housing with a halo ring and a conventional amber turn signal. They will not fit 367 or 567, or older 379-style round headlights. Compare your current lamps with our photos before ordering.
Upgrade the front of your Peterbilt 388 or 389 with this chrome projector pair. Each lamp has a projector low beam with a halo ring, a reflector high beam, and a built-in amber turn signal, and it mounts in the same headlight bucket used on 2008-2018 388 and 389 trucks. Sold as a driver and passenger pair.
Fitment
| Years | Vehicle | Notes |
|---|---|---|
| 2008-2015 | Peterbilt 388 | Chrome projector housing with halo, conventional amber turn |
| 2008-2018 | Peterbilt 389 | Chrome projector housing with halo, conventional amber turn |
Specs
- Sold as: driver and passenger pair
- Housing / style: chrome housing, clear lens, amber turn signal
- Lighting: projector low beam with halo ring, reflector high beam
- Connects to the factory headlight connector, no splicing
- New aftermarket assemblies
In the Box
- Driver-side headlight assembly
- Passenger-side headlight assembly
Interchange References
Fits the same 388 and 389 headlight opening used by the P54-6087 and P54-6112 assemblies.
Installation: Peterbilt 388 and 389 (2008-2018)
On a 388 or 389 the headlight sits in a chrome bucket on the hood. You can reach the back of the lamp with the hood tilted. Professional installation and beam aiming are recommended, especially if the bucket hardware is rusted. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.
- Tilt the hood open and support it.
- Unplug the factory connector from the back of the old assembly. Unbolt the lamp from the bucket and lift it out. Do not pull on the wiring, and do not force frozen bucket hardware — have a shop drill or extract a broken stud rather than risk cracking the hood.
- Set the new assembly in the same bucket, start the bolts, and connect the factory headlight connector.
- Repeat on the other side, reconnect the battery, and test low beam, high beam, the halo, and the amber turn signal. Aim the lamps on a level surface before driving at night.
Frequently Asked Questions
Which trucks do these headlights fit?
Peterbilt 388 (2008-2015) and 389 (2008-2018) with this chrome projector housing. Compare your current lamps with our photos before ordering.
Will they fit a 367 or 567?
No. These are for 388 and 389 only. Do not order them for 367, 567, or older 379-style trucks.
Are these full LED headlights?
No. These are chrome projector assemblies with a halo ring and a conventional amber turn signal, not a full-LED housing.
Are these a bulb kit or complete assemblies?
These are complete driver and passenger headlight assemblies, not a bulb-only kit. They replace the lamp that sits in the factory headlight bucket.
How are they installed on a 388 or 389?
Tilt the hood, unplug the factory connector, unbolt the lamp from the chrome bucket, and set the new assembly in the same opening. Aim the lamps before nighttime driving.