Clear Lens Tail Lights 4pc for Lexus GS300 / GS400 / GS430 (1998-2005)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Stock red S160 tails dull the GS rear—this clear 4pc set opens the rear to a brighter, cleaner night signature on 1998-2005 GS300 / GS400 / GS430. GENSSI's Lexus GS kit is a vehicle-specific outer+inner clear pair set that bolts in and plugs into the factory harness.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1998-2005 | Lexus / GS300 / GS400 / GS430 | Yes |
Specs
- Style: Chrome housing, all-clear lens (outer + inner)
- Bulbs: x10 color bulbs included — 7443 / 7440 / 921 sockets as equipped
- Sold as: Clear lens 4pc outer + inner tail light set
- Fit: Direct-fit clear 4pc tails for 1998-2005 Lexus GS300 / GS400 / GS430
Interchange
81561-30750, 81560-30820, 81561-30820, 81590-30070, 81591-30070, 81551-30780, 81550-30850, 81551-30850, 81580-30120, 81581-30120
What's included
- 1x Driver outer clear tail light
- 1x Passenger outer clear tail light
- 1x Driver inner clear tail light
- 1x Passenger inner clear tail light
- Color bulbs for equipped sockets (7443 / 7440 / 921)
Installation — Lexus GS300 / GS400 / GS430 (1998-2005)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
- Open the trunk. Pull back the rear side and deck trim to reach the outer and inner tail light fasteners and harness connectors.
- Disconnect each harness. Remove the mounting nuts / fasteners and slide the factory outer and inner assemblies straight back out of the body openings.
- Install the included color bulbs into the new clear housings. Seat each new outer and inner assembly, reconnect the plugs, and snug the fasteners while checking quarter-panel and deck gaps.
- Refit the trunk trim, reconnect the battery, and test parking, brake, turn, and reverse on both sides.
Buyer FAQ
Is this a full outer+inner kit? Yes. You get left and right outer plus left and right inner clear assemblies—four pieces total.
Are these LED assemblies? No. These are clear-lens housings with included color bulbs for the factory-style sockets—not full LED boards.
Do I splice wiring? No. After trunk access, the assemblies bolt into the S160 openings and plug into the factory harness.