Clear Lens Tail Lights Pair for Ford F-Series Styleside (1974-1979)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A faded red bedside lens leaves a 1970s F-Series looking dull from a car length back, and this clear pair opens that lamp up while a red 1157 keeps the brake readable at night. GENSSI's set is a left and right housing for the one-piece plastic lamp on 1974-1979 Styleside trucks, not the earlier metal lamp, and the factory sockets twist in with no splicing.
Important Fitment Note: 1973 and early 1974 trucks, before serial number T00001, use the earlier metal two-piece lamp. Those metal sockets do not lock into this plastic housing. Flareside beds use a different lamp. A 1978-1979 Bronco quarter panel has two ears beside the opening. Trim those ears if the housing will not pass. The same housing also fits 1975-1983 E-100 and 1975-1991 E-150, E-250, and E-350.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1974-1979 | Ford / F-100, F-250, F-350 Styleside, from serial T00001 | Yes |
| 1975-1979 | Ford / F-150 Styleside | Yes |
| 1978-1979 | Ford / Bronco | Yes |
| 1975-1991 | Ford / E-150, E-250, E-350 | Yes |
| 1973 | Ford / F-Series, metal two-piece lamp | No |
| 1980-1986 | Ford / F-150 | No |
Specs
- Style: Clear lens with a black gasket, for the one-piece plastic bedside lamp
- Bulbs: Incandescent. Brake, tail, and turn use a red bayonet 1157 so the clear lens still reads red. Reverse uses a 1156. Move the factory sockets. Two red 3157 wedge bulbs come in the box and do not fit these bayonet sockets
- Sold as: Pair — left and right tail light assemblies, plus two red 3157 wedge bulbs
- Fit: Direct replacement for the one-piece plastic lamp on 1974-1979 Styleside trucks from serial T00001, 1978-1979 Bronco, and 1975-1991 Econoline. Factory sockets, no splicing
Interchange
D5UZ-13405-A, D5UZ-13404-A, D4TZ-13405-A, D4TZ-13404-A
What's included
- 1x Driver (left) clear lens tail light
- 1x Passenger (right) clear lens tail light
- 2x red 3157 wedge bulbs
Installation — Ford F-Series Styleside (1974-1979)
- Lower the tailgate. The lamp grounds through its mounting screws, so keep those screws.
- Remove the screws through the top and bottom mounting holes in the lamp gasket.
- Pull the lamp straight out of the bedside. Support it. Do not hang it from the wires.
- Twist the brake socket and the reverse socket a quarter turn counterclockwise and pull them out. A metal socket from a 1973 or early-1974 truck will not lock into this plastic housing.
- Put a red 1157 in the brake socket and the factory 1156 in the reverse socket. A clear bulb will not show a red brake through this clear lens. The two red bulbs in the box are 3157 wedges. They do not fit these bayonet sockets.
- Lock both sockets into the new housing. Seat the lamp and reinstall the screws snug. On a 1978-1979 Bronco, trim the two quarter-panel ears if they stop the housing from passing the opening.
- Check park, brake, both turn signals, and reverse before you raise the tailgate. Repeat on the other side.
Buyer FAQ
Will this fit a 1973 F-100? No. Trucks built before serial number T00001 in 1974 use a metal two-piece lamp. This pair is the later one-piece plastic housing.
Are the red bulbs in the box the right size? No. Those are 3157 wedges. Use a red 1157 for brake, tail, and turn, and a 1156 for reverse. A clear bulb will not read red through this clear lens.
Which trucks and vans fit? Styleside F-100, F-250, and F-350 from serial T00001 through 1979, F-150 from 1975-1979, Bronco from 1978-1979, and Econoline vans that use D5UZ-13405-A and D5UZ-13404-A. A flareside bed does not.