Clear Sequential LED Tail Lights for Ford Mustang (1999-2004)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Stock New Edge reds look flat next to a clear sequential LED rear—this pair puts a modern chase-turn signature on 1999-2004 Mustang. GENSSI's Ford Mustang kit is a vehicle-specific clear sequential LED set with harness that bolts in and plugs into the factory connectors.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 1999-2004 | Ford / Mustang New Edge (V6, GT, Convertible, Mach 1, SVT Cobra) | Yes |
Specs
- Style: Chrome housing, all-clear lens with sequential LED bulb upgrade
- Bulbs: x8 LED bulbs — 3157 / 3156 — plus sequential harnesses included
- Sold as: Clear sequential LED tail light pair with harness
- Fit: Direct-fit clear sequential LED tails for 1999-2004 Ford Mustang New Edge all trims
Interchange
XR3Z-13405-CA, XR3Z-13404-CA
What's included
- 1x Driver clear sequential LED tail light
- 1x Passenger clear sequential LED tail light
- x2 sequential wiring harnesses
- x8 LED bulbs (3157 / 3156)
Installation — Ford Mustang New Edge (1999-2004)
- Park on level ground, set the parking brake, switch lights and ignition off, and disconnect the negative battery cable.
- Open the trunk. Pull back the rear side trim / carpet to reach the tail light fasteners and harness connectors on each quarter panel.
- Disconnect each factory harness. Remove the mounting fasteners and slide the factory left and right assemblies straight back out of the body openings.
- Install the included 3157 / 3156 LED bulbs into the new clear housings. Connect the included sequential harness between the vehicle plugs and the new assemblies per the harness labeling.
- Seat each new assembly, snug the fasteners while checking quarter-panel and deck gaps, and secure the sequential harness away from sharp edges. Refit the trunk trim.
- Reconnect the battery and test parking, brake, sequential turn, and reverse on both sides.
Buyer FAQ
Does this fit 1996-1998 Mustang? No. Fitment is New Edge 1999-2004 only—not earlier SN95 1996-1998 tails.
Is the sequential harness included? Yes. Left and right sequential harnesses plus eight 3157 / 3156 LED bulbs ship in the kit.
Do I splice wiring? No. After trunk access, the assemblies bolt in and the sequential harness plugs between the vehicle connectors and the new lamps.