Halogen Headlights Pair for Honda Insight (2010-2011)

Give a 2010-2011 Insight a clean factory look again. This original-style halogen pair replaces tired or damaged headlights on that generation with dark factory-style housings that use the factory H11 bulb and the factory connector. Each lamp is CAPA certified and DOT and SAE compliant. This is a direct-fit pair — no splicing.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style dark factory-style halogen housing, clear lens
• Lighting: halogen, with H11 bulbs included
• CAPA certified, DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

Bulb size: H11 (included).

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly
• H11 halogen bulbs

Interchange References

Replaces the original halogen housings used under 33150TM8A01 / 33150-TM8-A01 (driver) and 33100TM8A01 / 33100-TM8-A01 (passenger), and Partslink HO2502139 / HO2503139. This is not the 2012-2014 housing (HO2502149 / 33150-TM8-A51).

Installation: Honda Insight (2010-2011)

On the 2010-2011 Insight, the front bumper cover comes off so you can reach the headlight bolts. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the hood. Remove the front bumper cover, keeping track of the bumper clips and the fender and liner fasteners. Replace any broken clips.
2. Remove the three mounting bolts on each headlight. Pull the assembly out slightly, release the harness clip from the housing, and unplug the factory connector. Do not pull on the wiring.
3. Install the included H11 bulbs in the new housings. Connect the factory-style connector, reinstall the harness clip, seat each assembly, and start the three bolts. Repeat on the other side.
4. Reinstall the bumper cover and fasteners, reconnect the battery, and test low beam and high beam. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which vehicles do these headlights fit?
2010-2011 Honda Insight only. They will not fit 2012-2014 Insight, which uses a later housing. Compare your current lamps with our photos before ordering.

Will they fit a 2012-2014 Insight?
No. 2012-2014 Insight headlights are a different assembly (HO2502149 / 33150-TM8-A51). This pair is the 2010-2011 lamp only.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
Yes. H11 halogen bulbs are included for both assemblies.

Are these CAPA certified?
Yes. These assemblies are CAPA certified, and they are also DOT and SAE compliant.

How are they installed on a 2010-2011 Insight?
On this generation, the front bumper cover comes off first. Each headlight is then held by three mounting bolts. Pull the assembly out slightly, release the harness clip, and unplug the connector. Install the new lamp with the included H11 bulbs, reconnect, reinstall the three bolts and the bumper cover, and aim the lamps before nighttime driving.