Halogen Headlights Pair for Suzuki SX4 Hatchback and Sedan (2007-2013)

Make your SX4 look new again from the front. This original-style halogen pair replaces faded, cracked, or foggy headlights on both the Hatchback and the Sedan, and it plugs into the factory connector with no splicing. Both lamps are DOT and SAE compliant.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style halogen housing, clear lens
• Lighting: halogen, bulbs not included
• Plugs into the factory connector (no splicing)
• DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly

Interchange References

Replaces the original halogen housings used under OEM 35320-80J20 (driver) and 35120-80J20 (passenger), and Partslink SZ2518106 / SZ2519106.

Installation: Suzuki SX4 (2007-2013)

On the 2007-2013 SX4, the front bumper cover has to come off to reach the headlight bolts. Professional installation and beam aiming are recommended. Turn off the lights and ignition and disconnect the negative battery cable before you start.

1. Open the hood and remove the screws along the top of the bumper cover. Then remove the screws along the bottom edge of the bumper cover.
2. Peel back the front of each wheel-well liner, remove the corner screws, and release the bumper from the fender latches. Pull the bumper cover forward, unplug any fog-light wiring, and set it aside.
3. Remove the headlight mounting bolts, pull the assembly forward, and unplug the connectors.
4. Move your bulbs into the new headlights, plug in the connectors, and bolt the new assemblies in place.
5. Reinstall the bumper cover, reconnect the battery, test all functions, and aim the lamps before night driving.

Frequently Asked Questions

Which vehicles do these headlights fit?
2007-2013 Suzuki SX4 Hatchback (Crossover) and Sedan with halogen headlights. Compare your current lamps with our photos before ordering.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
No. Bulbs are not included. Move your existing bulbs to the new assemblies or buy new ones.

Do I need to cut or splice any wiring?
No. Each lamp plugs into the factory headlight connector.

How are they installed on a 2007-2013 Suzuki SX4 Hatchback and Sedan?
The front bumper cover comes off first: the top and bottom bumper screws, the front of the wheel-well liners, the corner screws, and the fender latches. Then unbolt the headlight, move your bulbs to the new lamp, and reinstall. Aim the lamps before night driving.