Halogen Headlights Pair for Toyota Avalon (2011-2012)

Give a 2011-2012 Toyota Avalon a clean factory look again. This original-style halogen pair replaces tired or damaged headlight assemblies on Avalons that still use the factory halogen housings. Each lamp is CAPA certified and DOT and SAE compliant, and the halogen bulbs come in the box so you can install a complete pair.

Fitment

Specs

• Sold as: driver and passenger pair
• Housing / style: original-style halogen housing, clear lens, amber side reflector
• Lighting: halogen, with H11 bulbs included
• CAPA certified, DOT and SAE compliant
• New aftermarket assemblies, designed to replace the factory halogen units

Bulb size: H11 (included).

In the Box

• Driver-side headlight assembly
• Passenger-side headlight assembly
• H11 halogen bulbs

Interchange References

Replaces the original halogen housings used under 8115007110 (driver) and 8111007110 (passenger), including 81150-07110, and Partslink TO2502210 / TO2503210.

Installation: Toyota Avalon (2011-2012)

On the 2011-2012 Avalon, the front bumper cover is typically removed so you can reach the headlight mounting bolts. Professional installation and beam aiming are recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Support the car safely if you need to turn a wheel for better access. Remove the fasteners that hold the bumper cover along the top edge under the hood, along the lower edge, and in the wheel wells. Disconnect fog-lamp or parking-sensor connectors if the car has them, then carefully unclip the cover from the fenders and set it on a soft surface.
2. Unplug the factory connector from the back of the old assembly. Remove the mounting bolts that hold the headlight to the radiator support and fender, and lift the housing out. Do not pull on the wiring.
3. Set the new assembly in the same opening, start the bolts, and connect the factory-style connector. Repeat on the other side.
4. Reinstall the bumper cover and any connectors you removed, reconnect the battery, and test low beam, high beam, and the side marker / turn function. Aim the lamps on a level surface before driving at night.

Frequently Asked Questions

Which vehicles do these headlights fit?
2011-2012 Toyota Avalon models with factory halogen headlights. Compare your current lamps with our photos before ordering.

Will they fit an Avalon with HID or Xenon headlights?
No. These are halogen housings only and will not fit HID or Xenon headlight models.

Will they fit a 2005-2010 or 2013-up Avalon?
No. The 2005-2010 Avalon and the 2013-up Avalon use different headlight housings. This pair is for the 2011-2012 generation only.

Are these a pair or a single lamp?
This is a complete driver and passenger pair, not a single-side lamp.

Do they include bulbs?
Yes. H11 halogen bulbs are included for both assemblies.

Are they CAPA certified?
Yes. These assemblies are CAPA certified and DOT and SAE compliant.

How are they installed on a 2011-2012 Avalon?
The front bumper cover is typically removed to reach the mounting bolts. Unplug the factory connector, remove the bolts, and set the new lamp in the same opening. Reinstall the bumper cover and aim the lamps before nighttime driving.