HID Xenon Headlights Pair w/ LED DRL w/o AFS for Audi Q5 & SQ5 (2013-2017)

Replace yellowed or cracked headlights on your 2013-2017 Audi Q5 or SQ5 with this brand-new xenon pair with LED DRL, for cars without AFS. Reuse your factory D3S bulbs and ballasts.

Fitment

Will NOT fit: AFS (adaptive) models; halogen cars; 2009-2012 Q5.

Common Reasons to Replace

• Yellowed, hazy, or oxidized lenses reducing light output
• Cracked lens or broken mounting tabs
• Moisture or condensation inside the housing
• Collision damage

Specs

• Low beam: D3S HID (not included)
• Turn: PSY24W
• DRL/marker: built-in LED
• AFS: No
• DOT compliant
• Quantity: Pair (Left + Right)
• Condition: New

Interchange Part Numbers

OEM: 8R0941043E, 8R0941043B，8R0941005E, 8R0941044E, 8R0941044B，8R0941006E. Partslink: AU2502179, AU2503179.

What's Included

• 1 x Driver side headlight assembly
• 1 x Passenger side headlight assembly
• Left and right headlights
• HID bulbs and ballasts are NOT included; reuse your factory ones

Installation

1. Switch off ignition and lights; disconnect the battery ground (xenon system).
2. Remove the radiator frame upper trim (push-pin clips), then the two hidden top bumper bolts.
3. From below remove the undertray/fender-liner bolts and the lower bumper bolts; in each wheel arch remove the liner bolts and the bumper-to-fender bolt.
4. Release the side clips, pull the bumper forward and unplug fog lights, parking sensors and headlight-washer hose if equipped.
5. Unplug the headlight connector, free the harness and washer hose clamps, unplug the front airbag crash sensor, then remove the headlight bracket bolts and lift out the lamp with bracket.
6. Install so the bracket guide nose enters the radiator frame groove, set even panel gaps, reinstall the bumper, reconnect the battery and adjust aim.

Steps compiled from audimanual.ru Audi Q5 Type 8R (2008-2017) bi-xenon headlight and front bumper procedures; remont-bampera.com Audi Q5 I (2008-2017) bumper removal. Professional installation and headlight aiming are recommended.

FAQs

What bulbs do these use?
D3S xenon, PSY24W turn, LED DRL per the listing.

Does it fit AFS cars?
No. Non-AFS only.

Do I need to remove the front bumper to replace these headlights?
Yes. On the Q5 8R the front bumper comes off to reach the headlight bracket bolts.

Can I install HID or LED kits?
Not applicable. These are factory-style HID/Xenon housings; reuse your factory HID bulbs and ballasts.