LED Headlights Pair for Infiniti G37 Coupe / Convertible (2008-2013) and Q60 Coupe / Convertible (2014-2015)

Give the front of your G37 or Q60 coupe a finished, modern look. This pair replaces the factory HID projectors with full LED housings — a white DRL bar, projector high and low beams, amber side markers, and a short start-up animation when you switch the lights on.

Features

• Full LED projectors. High beam, low beam, DRL, turn signal, and side marker lighting are built into the housings. Color temperature is 6500K, with a rated draw of 48-70W on a 12V system.
• Start-up animation and sequential turn signals. The running lights play a short animation for a few seconds when they come on, and the turn signals sweep in sequence.
• Black housings with clear lenses. The finish is polished and textured, with a clear lens over a black housing.
• Sealed, water-resistant construction. The housings are rated IP68. They carry DOT, ISO, and OE certifications as documented for this pair.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies, with the LED modules included. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory projectors have yellowed, hazed, or dimmed, and the front of the car no longer looks as sharp as the rest of the build.
• You want a brighter, cleaner 6500K LED cutoff in place of aging HID bulbs and ballasts.
• You like a start-up animation and sequential turn signals — details that make a G37 or Q60 coupe stand out at night or at a show.
• You're replacing worn or damaged assemblies and want a matched left-and-right pair rather than mixing an old lamp with a new one.

Why Drivers Love This LED Pair

• The LED DRL bar gives the coupe a crisp, modern face without changing the overall G37/Q60 shape.
• A few seconds of start-up animation and sequential turns add motion that stock HID housings simply do not have.
• Everything is in the housing — high, low, DRL, turn, and side marker — so you are not chasing separate bulbs for the main functions.
• We include both sides, ready to bolt in and plug into the factory connectors on non-AFS HID/Xenon cars.

Specifications

• Lighting technology: LED (full LED, modules included)
• Functions: High beam, low beam, DRL, turn signal, side light
• Color temperature: 6500K
• Wattage: 48-70W
• Voltage: 12V
• Housing / lens: Black housing, clear lens, polished and textured finish
• Water resistance: IP68
• Certifications: DOT, ISO, and OE as documented
• Warranty: 1 year
• Sold as: Pair (driver and passenger)
• Fitment: 2008-2013 Infiniti G37 2-door coupe and convertible; 2014-2015 Q60 2-door coupe and convertible; factory HID/Xenon without AFS only

What's in the box

• 1 x driver-side (left) LED headlight assembly
• 1 x passenger-side (right) LED headlight assembly

Installation on the 2008-2013 G37 and 2014-2015 Q60 coupe

On these 2-door models, the front bumper cover has to be loosened or dropped to reach every headlight bolt. Many owners pull the top bumper clips, the bumper-to-fender screw in each wheel well, and the hood-seal bracket, then ease the bumper corners forward instead of removing the cover completely. Either way, disconnect the battery first and support the bumper so it does not hang on the wiring or paint.

Each assembly is held by several 10 mm bolts (typically two at the top, one at the fender, and one lower bolt). Pull the lamp forward, disconnect the main harness, and watch for a factory zip-tie on the wiring if the lamps have never been out. These housings are built for factory HID/Xenon cars without AFS — they will not correct an AFS-equipped or sedan front end.

Reverse the steps to reinstall, confirm that high beam, low beam, DRL, turn, side marker, and the start-up animation all work before you fully clip the bumper back, then aim the lamps on level ground. Professional installation is recommended.

FAQ

What does this pair fit?
2008-2013 Infiniti G37 2-door coupe and convertible, and 2014-2015 Q60 2-door coupe and convertible, with factory HID/Xenon headlights and no AFS (Adaptive Frontlight System). It does not fit 4-door sedan models or AFS / adaptive-headlight cars.

Do I need to remove the bumper?
Yes — at least loosen and drop the front bumper cover. The lower and side headlight bolts are not reachable with the cover fully in place.

Will it work with my factory HID wiring?
It is made for factory HID/Xenon cars without AFS and plugs into the factory connectors. It is not for halogen-only cars or for AFS-equipped cars.

Is this a single lamp or a pair?
This is a pair: driver and passenger assemblies.

What warranty do we include?
These headlights are covered by a 1-year warranty.