LED Headlights Pair w/ LED Module for Chevy Silverado 2500HD 3500HD (2020-2023)
$345.95
Ir directamente a la información del producto
LED Headlights Pair w/ LED Module for Chevy Silverado 2500HD 3500HD (2020-2023)
$345.95
DS-84738619
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace cracked or hazy LED headlights on your 2020-2023 Silverado HD (LTZ / High Country) with this brand-new LED high/low + DRL pair with LED module.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2020-2023 | Chevrolet Silverado 2500HD / 3500HD LTZ, High Country (factory LED) | Factory LED headlights |
Will NOT fit: Silverado HD with factory halogen headlights; Silverado 1500.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam, DRL, turn: built-in LED
- LED module: included
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84738619, 87818247, 84685642, 84695497, 84725320, 85133186, 85149467, 86788469, 87818248, 84653968, 84685643, 84695498, 84725321, 85133187, 85149468, 86788470. Partslink: GM2503505, GM2502505.
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- Bulbs and LED module included
Installation
- Open the hood, remove the two T15 screws at the hood latch and the ten clips holding the radiator/upper shield, and lift the shield off.
- Unplug the grille-mounted sensor/fog and front-camera connectors, then remove the grille: four 10 mm bolts across the top and two 10 mm bolts on each side.
- Remove the fender-liner screws and the corner screw at each end and take off the side bumper panel to expose the lower headlamp bolt.
- Remove the three 10 mm headlamp bolts, lift the lamp off its upper bracket, unplug it, install the new lamp and reverse; aim the headlights.
Steps compiled from Ranch Hand 2020+ Silverado/Sierra HD grille-guard install guide (grille and headlamp access) and GM service procedure. Professional installation and headlight aiming are recommended.
FAQs
Will these fit a halogen Silverado HD (WT/Custom/LT)?
No. Factory LED-equipped LTZ / High Country only.
Will these fit a Silverado 1500?
No. The HD uses different headlamps.
Do I need to remove the front bumper to replace these headlights?
No. Only the upper shield, grille and side panels come off; the lamp is held by three 10 mm bolts.
Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.