LED Reflector Headlights Pair w/ LED Module for Chevy Equinox LS (2022-2024)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
Replace cracked or hazy headlights on your 2022-2024 Equinox LS with this brand-new LED reflector pair with LED module and halogen turn signal.
Fitment
| Year | Make / Model | Fits |
|---|---|---|
| 2022-2024 | Chevrolet Equinox LS (LED reflector, halogen turn signal) | Factory LED reflector headlights |
Will NOT fit: LT / RS / Premier with LED DRL; 2018-2021 Equinox.
Common Reasons to Replace
- Yellowed, hazy, or oxidized lenses reducing light output
- Cracked lens or broken mounting tabs
- Moisture or condensation inside the housing
- Collision damage
Specs
- Low/high beam: built-in LED reflector
- Turn signal: halogen bulb (included)
- LED module: included
- DOT compliant
- Quantity: Pair (Left + Right)
- Condition: New
Interchange Part Numbers
OEM: 84949293, GM2503531, GM2502531, 84907571, 85538061, 84907570, 84949292, 85538059. Partslink: .
What's Included
- 1 x Driver side headlight assembly
- 1 x Passenger side headlight assembly
- LED module included
Installation
- Turn the wheel to full lock and remove the five T15 screws at each bumper/wheel-liner edge, then the hidden 7 mm corner bolt behind the liner.
- Remove the 7-8 lower 7 mm bolts to the splash shield and the T15 screws across the upper grille support.
- Pry the fascia clips loose at the fenders and headlamps, unplug the fog/sensor harness (red lock tab first) and remove the bumper.
- Remove the four headlamp screws (one at the lower front of the fender), pull to release the locator pin, unplug, install the new lamp (4 N·m / 56 lb-in) and aim.
Steps compiled from ReveMoto 2022-2024 Equinox front bumper removal guide; GM service manual "Headlamp Replacement" (Equinox). Professional installation and headlight aiming are recommended.
FAQs
Will these fit an Equinox LT or RS?
No. LS reflector-style lamps only; LT/RS use a different headlamp.
Are the turn bulbs included?
Yes, the halogen turn-signal bulb is pre-installed.
Do I need to remove the front bumper to replace these headlights?
Yes. The front bumper fascia has to come off to reach the headlamp bolts. Plan on 1-2 hours with a helper.
Can I install HID or LED kits?
Not applicable. The low and high beams are built-in factory LED; there is no replaceable headlight bulb for an LED or HID kit.