Red and Amber Halogen Tail Lights Pair for Toyota Tundra (2000-2006)

Refresh a 2000-2006 Tundra with this red and amber halogen tail light pair. You get driver and passenger assemblies with a stacked amber, red, and clear lens in a black housing. Tail, brake, turn, and reverse functions are halogen, and bulbs are included. The housings use the factory mounting points and factory-style connectors.

Fitment

Specs

• Sold as: a driver and passenger pair
• Style: black housing, amber, red, and clear three-lens stack
• Lighting: halogen tail, brake, turn, and reverse; bulbs included
• DOT certified
• 12 V
• New aftermarket assemblies

In the Box

• Driver and passenger red and amber halogen tail lights
• Bulbs

Interchange References

Replaces original-style 2000-2006 Tundra fleetside tail lights commonly crossed with 81550-0C010, 81560-0C010, TO2801129, and TO2800129.

Installation: Toyota Tundra (2000-2006) Regular Cab and Access Cab fleetside

On these Tundras the tail lights bolt to the bedside and are reached with the tailgate open. Professional installation is recommended. Switch off the lights and ignition, set the parking brake, and disconnect the negative battery cable before you start.

1. Open the tailgate. From the bed opening, locate the fasteners on each tail light housing.
2. Remove the fasteners and pull the housing straight back out of the bedside. Do not pry on the lens.
3. Unplug the factory connector.
4. Plug the factory connector into the new housing until it clicks, set the housing into the opening, start the fasteners by hand, then tighten them evenly.
5. Repeat on the other side. Reconnect the battery and check tail, brake, turn, and reverse functions before you drive.