Red Clear LED Tail Lights Pair for Porsche 911 Carrera (2005-2008)
Free shipping to the lower 48 · Returns & refunds · Questions? Contact us
A 2005-2008 Carrera drops the amber bulb section for a red and clear LED lens. GENSSI supplies the pair and the resistors for the halogen-tail cars, and the factory sockets move over.
Important Fitment Note: These fit the 2005-2008 Carrera and Carrera S coupe and cabriolet that left the factory with halogen tails. They do not fit a car that came with LED tails, and they do not fit the wide-body Carrera 4S, Turbo, GT2, or GT3. The resistors get hot. Mount each one against metal.
Fitment
| YEAR | MAKE / MODEL | FITS |
|---|---|---|
| 2005-2008 | Porsche 911 Carrera and Carrera S, coupe and cabriolet, halogen tails | Yes |
| 2005-2008 | Porsche 911 Carrera 4S, Turbo, GT2, and GT3 | No |
| 2009-2012 | Porsche 911 | No |
Specs
- Style: Red and clear lens with an LED center
- Bulbs: LED center with the factory sockets reused. Two resistors are in the box
- Sold as: Pair plus two resistors. Factory sockets transfer
- Fit: 2005-2008 911 Carrera and Carrera S coupe and cabriolet with halogen tails
Interchange
99763148504, 99763148604
What's included
- 1x Driver tail light
- 1x Passenger tail light
- 2x Resistors
Installation — 2005-2008 Porsche 911 Carrera
- Open the engine cover and pull the side carpet away from the lamp.
- Unplug the harness and pull the factory sockets out of the old lens. Those sockets go into the new lamp.
- Remove the nuts on the lamp studs and pull the lamp out.
- Fit the factory sockets into the new lamp. Mount each resistor against bare metal in the engine bay, clear of plastic and carpet. The resistors get hot.
- Plug the harness in, set the lamp on the studs, and tighten the nuts.
- Check tail, brake, turn, and reverse. The turn should flash at a normal rate with the resistor connected.
Buyer FAQ
Does this fit a 2005 Turbo? No. The Turbo, GT2, GT3, and Carrera 4S use the wide-body lamp. This pair is the Carrera and Carrera S halogen lamp.
Will a 2009 Carrera take these? No. 2009-2012 cars left the factory with LED tails and a different housing.
Why are resistors in the box? The LED draws less than the halogen bulbs. Each resistor mounts on metal so the turn signal keeps a normal flash rate. They get hot in use.