GENSSI hero — red and clear tail lights pair for Toyota Corolla (1998-2002) on white

Red Clear Tail Lights Pair for Toyota Corolla (1998-2002)

$134.95
Ir directamente a la información del producto
GENSSI hero — red and clear tail lights pair for Toyota Corolla (1998-2002) on white

Red Clear Tail Lights Pair for Toyota Corolla (1998-2002)

$134.95
DS-COROLLA-TAIL-RED-CLEAR-PAIR-1998-2002

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

An amber turn section leaves a 1998-2002 Corolla looking stock from the quarter, and this red and clear pair keeps the brake red while the turn and reverse read through a clear lens. GENSSI's set is the left and right body-mounted lamp, and the factory sockets twist in with no splicing.

Important Fitment Note: 1998-2002 Corolla only. A 2003-2008 Corolla uses a different housing. These are the body-mounted lamps, one per side.

Fitment

YEAR MAKE / MODEL FITS
1998-2002 Toyota / Corolla Yes
2003-2008 Toyota / Corolla No

Specs

  • Style: Chrome housing with a red brake lens and a clear turn and reverse lens
  • Bulbs: Incandescent. Bulbs and sockets are not included. Each side uses a 3157 for brake and park, a 3156 for the turn signal, and a 194 for the small park lamp
  • Sold as: Pair — left and right body-mounted red and clear tail lights. Bulbs and sockets are not included
  • Fit: 1998-2002 Toyota Corolla sedan. Factory sockets, no splicing

Interchange

81561-02070, 81550-02070, TO2800121, TO2801121

What's included

  • 1x Driver (left) red and clear tail light
  • 1x Passenger (right) red and clear tail light

Installation — Toyota Corolla (1998-2002)

  1. Confirm a 1998-2002 Corolla. A 2003-2008 Corolla uses a different lamp.
  2. Open the trunk. Pull the corner trim back. The cover over the lamp studs is held by Phillips screws. Use a Phillips screwdriver and a 10mm socket.
  3. Remove the cover, then remove the three 10mm bolts. Unplug the connector and pull the lamp out. Do not hang it from the wires.
  4. Twist out the sockets. The sockets and bulbs are not in the box. The 3157 is brake and park, the 3156 is the turn signal, and the 194 is the small park lamp.
  5. Lock those sockets into the new housing in the same chambers.
  6. Feed the connector through, seat the lamp, and snug the three 10mm bolts. Do not overtighten the plastic. Reinstall the cover and the corner trim.
  7. Check park, brake, both turn signals, and reverse, then repeat on the other side.

Buyer FAQ

Does a 2003 Corolla fit? No. This pair is the 1998-2002 body-mounted lamp. A 2003-2008 Corolla uses a different housing.

Are the bulbs included? No. Move the factory sockets, the 3157, the 3156, and the 194.

Which part numbers does this replace? Left replaces 81561-02070. Right replaces 81550-02070.

También te puede interesar