Red LED Tail Lights Pair for Chevy Camaro (2019-2024) on white background

Red LED Tail Lights Pair for Chevy Camaro (2019-2024)

$400.95
Ir directamente a la información del producto
Red LED Tail Lights Pair for Chevy Camaro (2019-2024) on white background

Red LED Tail Lights Pair for Chevy Camaro (2019-2024)

$400.95
DS-CAMARO-TAIL-RED-LED-PAIR-2019-2024

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Give your 2019-2024 Camaro a bold red LED signature that reads sharper on the brake and stands out in traffic at night. GENSSI supplies this complete left-and-right pair as direct-replacement assemblies made for the Camaro, not a universal cover or a bulb-only swap.

Important Fitment Note: This is a complete pair of red LED tail light assemblies (driver and passenger) for the 2019-2024 Chevrolet Camaro. It replaces the factory housings and is not an overlay.

Fitment

YEAR MAKE / MODEL SUBMODEL / BED FITS
2019-2024 Chevrolet Camaro 1LS, 1LT, 2LT, 3LT, 1SS, 2SS, ZL1 Yes

Specs

  • Type: LED tail light assemblies, left & right - not a universal cover
  • Housing color: Red
  • Light color: Red LED
  • Placement: Rear, driver & passenger side
  • Sold as: Pair (2 pieces)
  • Fitment type: Direct replacement
  • Construction: Sealed assembly, screw mounting, wire connection
  • Voltage: 12 V

Interchange

84529733, 84529732

What's included

  • 1 x pair red LED tail light assemblies (driver side & passenger side)

Installation — Chevy Camaro (2019-2024)

  1. Park on level ground, set the parking brake, and open the trunk. On 2019-2024 Camaro, the rear bumper fascia overlaps the outer tail lamp housings, so the fascia must come off before the lamps will clear.
  2. Remove the rear wheels if needed for access, then remove the inner-fender screws/clips and the remaining rear fascia fasteners so you can carefully lower / remove the rear bumper cover. Support the fascia so it does not hang on harnesses or sensors.
  3. From inside the trunk, pull back the side liner and remove the three 8 mm nuts that secure each outer tail lamp. Release the orange friction grommets / locating studs on the outboard edge of the housing.
  4. Disconnect the lamp harness connector, then pull the assembly straight rearward out of the quarter opening. Repeat on the opposite side.
  5. Seat each new lamp on the locating studs, reconnect the harness until it clicks, and reinstall the three 8 mm nuts snug — do not overtighten plastic studs. Refit the rear fascia and liners in reverse order, then test running, brake, turn, and reverse lights.

Buyer FAQ

Will these look like cheap covers on my Camaro? No. These are complete red LED tail light assemblies that replace the factory units. They are not stick-on overlays or lens covers.

What years and trims does this pair fit? The 2019-2024 Chevrolet Camaro in 1LS, 1LT, 2LT, 3LT, 1SS, 2SS and ZL1 trims. Interchanges with OEM 84529733 and 84529732.

What is in the box? One left and one right red LED tail light assembly, a complete pair for the rear of the car.

También te puede interesar