RGB LED Tail Lights Pair for Mitsubishi Lancer Sedan (2008-2017) / Lancer Evolution X (2008-2015)

The 2008-2017 Lancer sedan and Evolution X already have a tight, aggressive rear end. This RGB LED pair leans into that — a color-changing chevron, a sequential amber turn, and a start-up animation in the sedan opening.

Features

• RGB LED pair with a start-up animation. Color-changing running lights, a sequential amber turn, brake, and reverse are built into the housings, with app control for the RGB modes as shown in the photos.
• Built for the 2008-2017 Lancer sedan and 2008-2015 Evolution X. On-car fitment is the CY/CZ sedan and Evo X rear. It does not fit Lancer Sportback, and it does not fit 2018 or later models.
• Smoked housings with a sealed LED layout. The pair uses a sealed assembly with DOT, ISO, and SAE certifications as documented for this design.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Tail Lights

• The factory 2008-2017 sedan or Evolution X tails have dulled, and the rear no longer looks as sharp as the rest of the car.
• You want color-changing RGB running lights and a sequential turn in the Lancer sedan / Evo X opening.
• You confirmed your car is a 2008-2017 Lancer sedan or a 2008-2015 Evolution X, not a Sportback.
• You want a matched pair of outer tail lights.

Why Drivers Love This RGB Pair

• The RGB chevron and start-up animation give the 2008-2017 Lancer sedan and Evolution X a night-drive look the factory lamps never had.
• The housing is shaped for the sedan / Evo X opening, so the pair sits flush on both cars.
• We ship a matched pair with running, brake, turn, and reverse functions in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2008-2017 Mitsubishi Lancer sedan and 2008-2015 Lancer Evolution X (does not fit Sportback or 2018 and later)
• Lighting: Full LED, RGB running light, sequential turn signal, start-up animation
• Functions: Running light, brake, turn signal, reverse
• Housing / lens: Black housing, smoked lens
• Voltage: 12V
• Certifications: DOT, ISO, SAE as documented for this pair
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) tail light assembly
• Passenger-side (right) tail light assembly

Installation on the 2008-2017 Mitsubishi Lancer sedan and 2008-2015 Evolution X

Work from the trunk. Disconnect the battery. On the 2008-2017 Lancer sedan and 2008-2015 Evolution X, pull back the trunk side trim on each side enough to reach the two or three nuts that hold the outer tail light. Unplug the harness, remove the nuts, and slide each lamp straight back out of the quarter opening. Set the new housings in place, reconnect, and test running lights, brake, turn signals, reverse, and the RGB modes before the trim goes back on. Refit the trim and close the trunk. Professional installation is recommended.

FAQ

Will this fit a Lancer Sportback?
No. The Sportback uses a different tail light. This pair is for the 2008-2017 Lancer sedan and 2008-2015 Lancer Evolution X only.

Will this fit a 2018 or newer Lancer?
No. This pair is shaped for the 2008-2017 Lancer sedan and 2008-2015 Evolution X opening.

Does this fit both the Lancer sedan and the Evolution X?
Yes. The 2008-2017 Lancer sedan and 2008-2015 Evolution X share this tail-light opening.

What warranty do we include?
These tail lights are covered by a 1-year warranty.