Sequential LED Headlights Pair for Honda Accord Sedan (2008-2012)

Give the front of your 2008-2012 Accord sedan a cleaner, more finished look. This sequential LED pair replaces the factory lamps with full LED housings — a white DRL, projector high and low beams, and a walking amber turn signal in a black housing.

Features

• Full LED housings with sequential turn signals. High beam, low beam, DRL, and sequential turn signals are built into the pair, with the white, amber, and blue lighting shown in the photos. The housings run on a 12V system.
• Built for the 8th-gen Accord sedan. The pair is shaped for the 2008-2012 4-door sedan opening and does not fit coupe models.
• Black housings with clear lenses, IP67-rated. The housings use ABS, PC, and PMMA construction and are documented as IP67 water-resistant, with DOT and ISO certifications for this design.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory headlights have yellowed or dimmed, and the front of the sedan no longer looks as sharp as the rest of the car.
• You want a sequential turn signal and a cleaner LED cutoff in place of aging 8th-gen sedan lamps.
• You are refreshing a 2008-2012 Accord sedan and want the front lighting to match the build.
• You confirmed your Accord is a 4-door sedan, not a coupe.

Why Drivers Love This LED Pair

• The sequential turn signal and multi-color DRL give the 2008-2012 sedan a look the factory lamps never had.
• We ship a matched pair built for the 4-door sedan opening.
• IP67-rated housings and a 1-year warranty stand behind the pair.
• The pair connects to the factory connectors on the 8th-gen sedan after the bumper comes off.

Specifications

• Fitment: 2008-2012 Honda Accord 4-door sedan (does not fit coupe)
• Lighting: Full LED with sequential turn signals
• Functions: DRL, sequential turn signal, high beam, low beam
• Power: 12V system
• Housing / lens: Black housing, clear lens
• Sealing: IP67
• Certifications: DOT, ISO as documented for this pair
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) headlight assembly
• Passenger-side (right) headlight assembly

Installation on the 2008-2012 Honda Accord sedan

The front bumper cover has to come off. Disconnect the battery. Remove the upper grille and trim fasteners, then the bumper screws and clips in the wheel wells and along the underside, and lift the bumper off its side hooks. Unbolt the headlight bolts, pull each assembly forward, and unplug the harness. Set the new housings in place, reconnect, and test high beam, low beam, DRL, and the sequential turn signals before the bumper goes back on. Refit the bumper and aim the lights. Professional installation is recommended.

FAQ

Will this fit my Accord coupe?
No. This pair is for the 2008-2012 Honda Accord 4-door sedan only. It does not fit coupe models.

Do I have to remove the bumper?
Yes. The front bumper cover has to come off to reach the headlight bolts.

What light functions are included?
High and low LED beams, DRL, and sequential turn signals are built into the pair, with the white, amber, and blue lighting shown in the photos.

What warranty do we include?
These headlights are covered by a 1-year warranty.