Sequential LED Headlights Pair for Mitsubishi Lancer (2008-2017) / Evolution X (2008-2015)

The 2008-2017 Lancer and Evolution X get a sharper front from this sequential LED pair — a white chevron DRL, a walking turn signal, and a clean LED cutoff in the same opening as the factory lamps.

Features

• White chevron DRL with sequential turn signals. High and low LED beams, a white chevron DRL, and sequential turn signals are built into the pair, as shown in the photos.
• Built for 2008-2017 Lancer and 2008-2015 Evolution X. The housing follows the CY/CZ Lancer and Evo X opening. It does not fit 2002-2007 Lancer.
• Black housings with clear lenses. The pair uses a sealed assembly as documented for this design.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Headlights

• The factory Lancer or Evo X headlights have dulled, and the front no longer feels as sharp as the rest of the car.
• You want a white chevron DRL and a sequential turn signal without color-changing RGB.
• You are building a Lancer or Evolution X and want the front lighting to match the rest of the work.
• You confirmed your car is a 2008-2017 Lancer or 2008-2015 Evolution X.

Why Drivers Love This LED Pair

• The white chevron and sequential turn signal give the Lancer and Evo X a cleaner night-drive look.
• The housing is shaped for the 2008-2017 Lancer and Evo X opening, so the pair sits flush.
• We ship a matched pair with high beam, low beam, DRL, and turn signals in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2008-2017 Mitsubishi Lancer and 2008-2015 Lancer Evolution X (does not fit 2002-2007)
• Lighting: Full LED with white chevron DRL and sequential turn signals
• Functions: DRL, sequential turn signal, high beam, low beam
• Power: 12V system
• Housing / lens: Black housing, clear lens
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) headlight assembly
• Passenger-side (right) headlight assembly

Installation on the 2008-2017 Mitsubishi Lancer and Evolution X

The front bumper cover has to come off. Disconnect the battery. Remove the upper radiator-cover pins and the top bumper bolts, then the wheel-well screws and the underside fasteners. Pull the bumper corners off the fender clips and lift the cover away. Unbolt each headlight, pull the assembly forward, and unplug the harness. Set the new housings in place, reconnect, and test high beam, low beam, DRL, and the sequential turn signals before the bumper goes back on. Refit the bumper and aim the lights. Professional installation is recommended.

FAQ

Will this fit a Lancer Evolution X?
Yes. This pair fits 2008-2015 Lancer Evolution X as well as 2008-2017 Lancer.

Is this the RGB version?
No. This pair uses a white chevron DRL with sequential turn signals. It is not the color-changing RGB version.

Do I have to remove the bumper?
Yes. The front bumper cover has to come off to reach the headlight bolts on the 2008-2017 Lancer and Evolution X.

What warranty do we include?
These headlights are covered by a 1-year warranty.