Smoke tinted LED tail lights 4-piece set for 2005-2013 Chevrolet Corvette C6

Smoke LED Tail Lights 4pc Set for Chevy Corvette C6 (2005-2013)

$142.95
Ir directamente a la información del producto
Smoke tinted LED tail lights 4-piece set for 2005-2013 Chevrolet Corvette C6

Smoke LED Tail Lights 4pc Set for Chevy Corvette C6 (2005-2013)

$142.95
DS-C6-TAIL-SMOKE-LED-4PC-2005-2013

Free shipping to the lower 48 · Returns & refunds · Questions? Contact us

Give your 2005-2013 Corvette C6 the night presence the factory halogen tails never had-smoke lenses that sit stealthy by day, then snap to a sharp LED signature the second you hit the brakes. This complete 4-piece GENSSI set replaces the stock rear housings with blacked-out, direct-fit LED assemblies engineered for the C6 bumper openings, so the transformation looks factory-installed, not bolted-on.

Important Fitment Note: This is a complete 4-piece rear LED assembly set for the 2005-2013 Chevrolet Corvette C6 (Base, Grand Sport, Z06, and ZR1). It replaces the factory housings-not a smoke overlay or bulb-only upgrade for the stock lamps.

Fitment

YEAR MAKE / MODEL SUBMODEL FITS
2005-2013 Chevrolet Corvette C6 Base / Grand Sport / Z06 / ZR1 Yes
- Chevrolet Corvette C5 or C7 No

Specs

  • Type: Full LED tail / brake assemblies (not a universal cover)
  • Lighting: LED - instant-on illumination so trailing drivers see you sooner
  • Lens color: Smoke / Tinted - aggressive blackout look when parked
  • Housing color: Black - matches the stealth C6 rear aesthetic
  • Placement: Rear (complete left & right set)
  • Sold as: 4-piece set
  • Fitment type: Direct replacement - plug into the factory harness, no splicing

Interchange

25958215, 10440715, 22762674, 25958213, 10440713, 25958216, 10440716, 22762675, 25958214, 10440714

What's included

  • 4 x smoke/tinted LED tail / brake lamp assemblies (complete rear set)

Installation - 2005-2013 Chevy Corvette C6

Tools: T15 Torx driver. Each C6 round tail lamp is held by one top screw and bottom guide tabs in the rear bumper-the same layout across 2005-2013 coupe and convertible.

  1. Park the car, turn the ignition off, and work one lamp at a time.
  2. Remove the single T15 Torx screw at the top of the factory housing. Do not lose the small metal retaining clip-if it drops into the rear bumper fascia it is hard to retrieve.
  3. Gently pull the top of the housing outward so it pivots on the two bottom guide tabs, then lift the assembly up and out of the bumper opening.
  4. Press the release tab on the harness connector and unplug the lamp (or twist the bulb socket counterclockwise if your install requires transferring OEM sockets).
  5. Repeat for the remaining three lamps so all four rear openings are clear.
  6. On each new smoke LED assembly, match left/right orientation, then reconnect: plug the vehicle harness in until it clicks, or seat transferred OEM sockets and reconnect-no splicing into factory wires.
  7. Align the two bottom guide tabs with the bumper notches, seat the bottom first, then press the top flush.
  8. Reinstall the T15 screw snug only-overtightening can crack the plastic ear or knock the clip into the bumper. Repeat for all four lamps.
  9. Turn on parking lights and verify brake, turn, and reverse on every lamp before you finish.

Buyer FAQ

Will these look like cheap tint covers on my C6? No. These are full LED housings with smoke lenses and black shells that replace the factory assemblies for a built-in stealth look-not stick-on overlays.

Do I need to cut or splice wiring? No. They are direct-fit C6 replacements designed to connect to the factory harness. Use a T15 Torx driver and follow the steps above.

What years and trims does this 4-piece set fit? 2005-2013 Chevrolet Corvette C6, including Base, Grand Sport, Z06, and ZR1. It does not fit C5 or C7.

También te puede interesar