Smoked LED Tail Lights Pair for Toyota GR86 / Subaru BRZ (2022-2024)

The second-gen GR86 and BRZ already have a tight, low rear end. This smoked LED pair fills that opening with a clean red running light, an amber turn, and a brighter LED cutoff than the factory lamps — a sharper look on the 2022-2024 coupe.

Features

• Full LED housings with a smoked lens. Running, brake, amber turn, and reverse functions are built into the pair, with a start-up animation as shown in the photos.
• Built for 2022-2024 GR86 and BRZ. On-car fitment is the second-generation coupe. It does not fit 2021 or earlier 86 or BRZ models.
• Smoked housings with a sealed LED layout. The pair uses DOT, ISO, and SAE certifications as documented for this design.
• Sold as a complete pair. You get both the driver-side and passenger-side assemblies. Professional installation is recommended.

Signs It's Time to Upgrade Your Tail Lights

• The factory 2022-2024 tails have dulled, and the back of the coupe no longer looks as sharp as the rest of the car.
• You want a smoked LED look and a cleaner cutoff in the second-gen GR86 / BRZ opening.
• You confirmed your car is a 2022-2024 GR86 or BRZ, not a first-generation 86 or BRZ.
• You want a matched pair of outer tail lights.

Why Drivers Love This LED Pair

• The smoked LED signature gives the 2022-2024 GR86 and BRZ a cleaner night-drive look than the factory lamps.
• The housing is shaped for the second-gen opening, so the pair sits flush on both the Toyota and the Subaru.
• We ship a matched pair with running, brake, turn, and reverse functions in the housings.
• A 1-year warranty stands behind the pair.

Specifications

• Fitment: 2022-2024 Toyota GR86 and Subaru BRZ (does not fit 2021 or earlier 86 / BRZ)
• Lighting: Full LED, smoked lens, start-up animation
• Functions: Running light, brake, turn signal, reverse
• Housing / lens: Black housing, smoked lens
• Certifications: DOT, ISO, SAE as documented for this pair
• Warranty: 1 year
• Sold as: Pair (driver and passenger)

What's in the box

• Driver-side (left) tail light assembly
• Passenger-side (right) tail light assembly

Installation on the 2022-2024 Toyota GR86 and Subaru BRZ

Work from the cargo area. Disconnect the battery. Pull back the rear side trim in the 2022-2024 GR86 or BRZ enough to reach the tail light fasteners. Unplug the harness, remove the nuts, and slide each lamp out of the quarter opening. Set the new housings in place, reconnect, and test running lights, brake, turn signals, and reverse before the trim goes back on. Refit the trim and close the hatch. Professional installation is recommended.

FAQ

Will this fit a 2021 or earlier 86 or BRZ?
No. The first-generation 86 and BRZ use a different tail light. This pair is for the 2022-2024 second-generation GR86 and BRZ only.

Does this fit both the GR86 and the BRZ?
Yes. The 2022-2024 Toyota GR86 and Subaru BRZ share the same rear lamp opening.

Is a trunk light bar included?
No. This is a pair of the left and right outer tail lights.

What warranty do we include?
These tail lights are covered by a 1-year warranty.